2008 Busa How To Install Led Tail Light?
- Thread starter kk8909
- Start date
Are you talking about the turn signals? The tail light on the 08 is already an LED set up.
Ludicrous Speed
Registered
Remove the tail and 2 bolts and one plug hold the tail light in(I have one too).
Tail comes off by removing the 2 visible bolts under the driver seat.
2 frankenstein bolts.
4 grab bar bolts.
4 mudflap bolts.
Pushpins under each side of tail.
2 of the 4 pushpins that hold the small plastic peice between the seats.
Trunk cable(remember to put it back!)
Unplug wire harness.
Lift tail off.
Anything is easy if you know how, but with a little practice the tail can be off in about 2 or 3 minutes.
The manual will help.
Service manuals for Suzuki GSX-R Motorcycles
Tail comes off by removing the 2 visible bolts under the driver seat.
2 frankenstein bolts.
4 grab bar bolts.
4 mudflap bolts.
Pushpins under each side of tail.
2 of the 4 pushpins that hold the small plastic peice between the seats.
Trunk cable(remember to put it back!)
Unplug wire harness.
Lift tail off.
Anything is easy if you know how, but with a little practice the tail can be off in about 2 or 3 minutes.
The manual will help.
Service manuals for Suzuki GSX-R Motorcycles
Similar threads
