Recent content by Xavius

Alright I got this one fixed by doing exactly what yall suggested and it worked. The frame covers that go around the neck of the frame need to be cut prior to installation. there is an approx. 1/2" x 1/2" hole in the front left portion of the neck where something has to protrude from in order...

anyone know how the mechanism works? any diagrams out there? is there a pin or hole i should be looking to see if it got covered or anything like that? handle bars and forks have full range left and right, no obstructions

They are held on by the bolts for the coolant resevoir on one side and the lower fairing bolt and seat bolt on the other side. The neck covers are held on by the tank bolts. and one bolt on the left side that has a hose holder bracket on the left at the neck.

I changed the handle bar holder to a chrome one and added frame covers to the sides and neck nothing else on the front end...

Did a little work on the Busa this week, now my steering lock wont engage, the key wont turn that far. Stop Run work just fine but it wont turn counter clockwise to the lock position... Anybody have any thoughts?

Chrome frame covers from Chromed Out Frame covers $300 for frame and neck covers (Home), gauge cover from All Things Chrome $90 (WELCOME), switch housings from Roaring Toyz $100 i think. (Roaring Toyz) and gas cap from Ball Z Motor Sports (www.BallZmotorsports.com) $100, Chrome 240 swingarm kit...

Good to know that they were easy, hope mine turn out the same. heard some horror stories about when they go wrong, with stuff shorting out, bike not starting etc etc. Thanks 808 ~on the square:coolcool:

hey Busa_wizard can you tell me which wire and color you used to do that, it's actually the route I want to take. I've heard rumors about the engine cutting out if you wire it this way or that....have you had any of those problems with your set up? I just want to make it work and if it has...

yes i just got them about 2/15/12 the rest of the stuff is here in the last month or two and a few things are still on the way...tracking numbers are great!

Thanks Matte i will take all of your advice and I did get the perimeter sensor and the optional Suz-1 connector. I was already thinking of doing it the wrong way, so thanks, was gonna hook up all the connectors then place the modules where I want them. But ive been told twice now to hook up...

I've found a few old threads about some other scorpio Alarms, I'm about to install the i900, i want to install all of it the disable module and all. anyone out there got any words of advice.....i'm listening and thankful. I will post pics after I install. Thanks in advance.:whistle:

Thanks GixerHP, those are actually the ones i got from raoring toyz, so im pretty sure i got the right ones. we'll see. I've already bought all my parts... mirrrors, scorpio sr-i900 Alarm, chrome frame covers, frame plugs, 240 swingarm kit, chrome upper triple tree, chrome gas cap, chrome gauge...

Hey Org, I got an 06', im blinging her up a lil bit here pretty soon, first mod i plan to do is chrome switch housings and chrome grips. I've havent done many mods to my Busa, but thats about to change. I guess if i break something what the hell.... its mine. I got the housings, grips as...

Awesome idea, I've been going back and forth on the sliders too. Cut or no cut. I actually like the look of the no-cut ones, but i already bought the cut ones, they're going on soon. Thanks for the idea and pics!!!

It's not a 'first thought' but from now on i will start taking pics as i do my Busa jobs so i can post them here. Thanks