Recent content by Terrence

Finally pulled my engine back apart to see what was going on. I got too excited and when I was putting it back together. I failed to pay attention to how I set the cams back in the bike and one of the bearings broke. So I just picked up another engine that was running and decided do a turbo...

I'm in the process of building a turbo bike. I've purchased all the key mechanisms i.e. Turbo, Rods, pistons, pendulum hardened case bolts etc. My question is I've seen talks of running two intake cams. Not sure what advantage this gives but it seems to be a common upgrade. 1. what is the...

All the above that you stated. It powers up, all the gauges work, the fuel pump is operational, the bike does turn over but just won't crank. I found the dealer mode plug, and made the connection and the code read C00. There is a wire that runs to the bottom of my engine I believe it is some...

I have an 05 Gen 1 Busa that I can't get to start. I recently took out my engine so that I can port my heads. I got everything wired back up and tried to start the bike and it wouldn't not start. Here is what I've done so far. 1. Make sure that the engine kill switch was not flipped on. 2...

for my own knowledge what is the reasoning behind it

At what point is the airbox no good when you using a turbo on my gen 1 busa. I see a lot of air pendulums made out of metal for turbo applications. Is this because of the heat from the turbo going through the airbox or is this just help prevent leaks? I'm starting to do my first turbo build and...

I'm in the process of trying to decide between nitrous or turbo. Turbo seems to be the way to go on first thought but I can't ignore nitrous as an option. My question is what all would I need to run an reliable nitrous setup that will push the my gen 1 hayabusa to 400hp. I'm more concerned with...

How I luv assumptions. Cutting corners, who said that! I simply posted about a brand that I found on this website. I'm not a pro street rider just simply shooting for part that will support 400hp max not 600hp. I'm familiar with Carrillo Rods, but their are also other good brands out there like...

Has anyone heard of Conrods, I saw on another post that they were using them in their turbo build. I'm looking for honest feedback as I know that some people are married to certain brands. I just want to know honestly are these H-Beam Connecting rods any good.

I currently run the battle ax and I am impressed with the tire. I've had several different brands and by far this battle ax is worth it's salt. I love peg scraping and also 1/4 mile dashes, on top of that my hayabusa is a daily driver. This is a lot to ask from any tire and still get life out of...

Hey brother I get it! There are a million things that can go wrong if you don't understand the basics to this type of setup. Like many other subscribers here I'm trying to gather as much information as I can from other peoples experience. So the questions may seem a little novice but it's only...

Thanks for the concern but I'm fine I promise. Just didn't know if it was the same for motorcycles like cars. When in ever I'm adding forced induction or nitrous to any projects,I like to make sure even if it's to an answer I think I already know. This will be my first turbo build on a bike so...

When I am looking at turbo hp ratings, when it says 400 is that an additional 400 or what my bike will make total.

I'm in the process of purchasing me a turbo what are the different size turbos that are available from small to large? I want to purchase a size that can net me a max of 400hp but my target goal is 350. I would like for it to fit under the faring's of my 05 LE Hayabusa

Does any one know what the stock size rod is for an gen 1 I'm trying to purchase a direct fit that doesn't require a spacer for my turbo application. I see connecting rods for turbo application but all require a spacer. Just curious what are the standard specs for a gen 1.