Recent content by Santos9899

anyone got a pic of where the rectifier sits?

i had almost the same problem, i checked everything on mine, fuel pump, injectors spark plugs, etc....it ended up being the power commander. try unpluging the power commander and put it back to stock and see if your problem still there. i removed mine and the problem went away. not sure why...

so here i am again.....i changed the following... fuel injectors fuel filter valve shims new fuel lines. re-synched the throttle bodies and cleaned out the tb... still my bike jerks while crusing...WTF!!!! could it be the kickstand wires? if so where? what else could it be?

in search of fuel injectors.......for troubleshooting purposes...just need a set to see if it will correct my jerking/sputtering problem....if you want them back i will send them back...just don't want to buy a set and it is not the fix....thanks

thats the thing. it worked well and ran fine till i took it apart to get it painted and when it was done i put it all back together and then this problem started... i was tol from my painter that the tank fell off the rack where he was going to paint it..it created a dent so he took out the...

so i finally got my bike back together....after waiting for all the pump seals, and shims (i re-shimmed my bike some were out of spec) and it seems to run alittle smoother but it still jerks....now i cleaned everything out and even changed out the filter...WTF>>>what could cause it? the only...

silly question...but what does a 262 shim equal to? what mm? for example 92025M: SHIM,T=2.65

hey guys i was doing a valve clearance check on my 2000 busa because it started to make tapping noise. I followed jinksters instructions (which by the way was great to use) and found that 6 of my shims are out of spec. I pulled the bucket off and checked the shim for the size thats currently on...

i get that you dont get it. but it was just my opinion on what the tail looks like on the different models.... i like my tail on my busa but in my opinion by swaping out the tail from the different years 99-07 to 08-09 it balances out the bike...its not that i or others are un happy with it...

that bike looks good man....like i said I think the 2g tail looks better on a 1g busa and the 1g busa tail on a 2g.... anyone else have a tail swap? perferbly a 1g 2g tail swap..i have seen the gsxr1000 tail swap but dont like it too much...it makes the busa look like a body builder who never...

i personally think that the gen1 tail looks better on the gen2 and vise versa. the gen2 (again my opinion only) has too much curves. with a simple gen1 tail it balances out evenly. the gen1 has alot of flat panels not too many curves so the gen2 tail makes it stand out a bit more. whats...

since i can't post on the classified section. I was wondering if anyone could help me locate a tail assembly from a 08-09 busa..i am willing to buy or trade for my 2000 all black tail assembly with rear hump and top gun undertail. thanks

since i can't post on the classified section. I was wondering if anyone could help me locate a tail assembly from a 08-09 busa..i am willing to buy or trade for my 2000 all black tail assembly with rear hump and top gun undertail. thanks

anyone intersted in doing a Gen1 tail conversion on the Gen2 busa like this? what do you think?

checked ebay...and did not find any....how much more is the catalyst?