Recent content by JW983

I really appreciate you taking the time to do that! It turns out that the other diagram had me way off. Also the last plate that needed to be offset was also the thickest. Its back together and no grinding!!!:thumbsup::beerchug:

Youre awesome man!! Much better than the diagram that I have. I did notice on the inside of the cover. The clutch cover plate was grinding against the inside housing. There is 3 bolts from the clutch cushion that extend to the inside of the housing. I can see wear marks from where the...

Okay no problem. I will post a video or pics when I get home. I plan on draining the oil, but hope I can diagnose while it's apart cause I can't tell until the bike is running. Although I was told it's done right when the clutch is engaged and you spin it with your hand. So hopefully that...

Thats what it sounds like, but it doesnt appear that way when i look at the cover for marks. Its a very hollow sounding rattle. When the cover is off and I engage the clutch it doesnt look like the last plates clear eachother. I guess 3rd times the charm and I start from scratch.

I guess I am a pioneer to this problem.

:please:

First things first, Ive searched several hours for the answer without any luck. SO I just replaced the OEM clutch kit on my 2005 Hayabusa. Read all the info about clutch order and pretty sure I got it right. Put it all back together and when the clutch is pulled in, i have hear a grinding...

Well actually only two of them had matching wires. On the tank side I have a Red wire and a Black w/ White lines. on the Harness side I have two Black w/ White lines both identical. ???

So when taking apart the tank of my recently purchased busa to clean the fuel pump, the wires from the harness pulled out and now I have no idea which wires to each hole... Any help from the experts would be greatly appreciated. **nevermind** Breath and moment of clarity and i realized the...

This is my bike before and after. I had it repainted but I am having trouble getting the plastic back on. The right side went on somewhat easily, but the left side seems to not line up. If i start at the nose, it wont reach in the back. I started at the bottom and got it the closest, but...

So after two weeks ive got my plastics back from my paint guy. He still has to touch up the front tire hugger. At this point so far Ive -Replaced Mirrors -Windscreen (Re-Bent Mounts) -Paint (Arctic white with Blue Pearl) -Cleaned Injectors, Changed plugs, cleaned fuel filter. -...

Awesome! Thanks for the link. Since my tank is at the paint shop, I guess I'll pull the plugs. However it's only when throttle is cracked fast is when it cuts out.

Wow, OK thank you! Are these also the cheap paper ones or possibly cleanable?

Here is some of the wiring craziness I was talking about. Ive did some untangling and tracing and found out I have a GPS locater, and Alarm. As well as the conviently "Seahawks" Color lights haha.. Now I just have to undo their crap and make it a little cleaner.

Ive tried searching the forums and its brought me a few dead ends. One useful thread I found was for a Gen 1, but seems to be different than my 06' LE. Following the steps has lead me to this point, and wondering if I am correct in assuming that this already has an inline fuel filter!? If so...