Recent content by Demon

Yes everything is still in working order. I haven't completed all of the cosmetic things. I'm still looking for something in chrome to shroud the part of the TSX that's poking out. I bought a Nokya 2500K H7 for the low so it might serve as a fog light. I'm going to adjust it downward a...

Finish product

I was going through past threads when I saw yours. Did you get the STI working inside of your headlight? I'm doing a retro myself with a 55w TSX setup. I've got the thing mounted in the assembly but I need to make some adjustments to the chrome liner still. Other than that things are...

I thought that I would have been able to add to the original post, guess not. Anyway. The screws that are in the TSX projector are size 8-32 (standard). I believe the screws were 2 or 2.5 inches long originally so I had to take a trip to the hardware store. The screws need to be about an...

:cheerleader:**Reserved**:cheerleader:

I wanted to share my project with the group. I’m in the process of retrofitting my headlight with an Acura TSX HID projector. My plans are to run this projector with an aftermarket 55w ballast & bulb. TSX Projector / OEM HID Bulb (front) TSX Projector / OEM HID Bulb (back)...

The TSX housing is all metal with the exception of the lense. I will be taking photos through out the process and posting the results.

I might begin taking the headlight assembly apart in the morning, or tonight depends on how I feel in the next hour. Front photo of the TSX projector. The bulb is a OEM Philips brand at 4100K. I have these bulbs just in case the 55w aftermarket bulb runs too hot for the project. A...

I guess I didn't specify... I'm retrofitting the headlight housing with a Acura TSX projector using a D2S 55w 5000K kit for the low beam. Starting that tonight :please: For the high beam I am leaving the stock halogen projector in place and I wanted to use a Nokya 2500K halogen bulb. But...

I'm doing the HID conversion to the low beam. I wanted to change the high beam as well. I am wondering if the high beam wiring can take an 80w bulb without issues or will I have to also get a better wiring harness?

That could have been ugly real quick. Glad you made it out ok.

I'll have to check those out...

I am going back to the BT's because of the milage I can get out of them. I just passed 13,000 miles on the bike. The BT rear gave me close to 8200 miles before it needed replaced by the wear bars. The Dunlop 208 only gave me about 4800 miles on it until the cords were showing. I still have...

:thumbsup: What a clown :laugh:

Has anyone heard of Bridgestone stopping the production of the BT56s? I have been pricing them on the internet and a friend suggested looking at the Bridgestone website to buy direct from the manufacturer. Well I went to the website and there is no information for that tire... I'm...