Show me your Fairing Grills!

[vulgar2]

Used tape to hold in place while the epoxy set....

[coop65sr]

Put mine in a couple of years ago...material has held up really well- I cut and hand-formed my own and installed. I molded mine in with a "outward" curvature to give it a little of a different look- wanted it to kinda come out of the openings to be seen more...

[bazooki]

View attachment 183290

Not to take this thread off on a tangent but are those the 33 l saddlebags or the 50 litre? Which ones do you prefer?

[BigBSBusa]

Here's a couple different version. The ones on Midnight are kind of tough to see because Vic matched the paint color so well.

[theskaz]

PPM Customs here for me too. Had them powdercoated to match my frame prior to shipping. Total cost was like $89.00 I think.

*note* The Epoxy that they send w/ theirs is awful and can melt under high heat conditions. I highly recommend you use Loctites version which canbe found @ Lowes or Home Depot...much better :agree:

Slightly off topic, but OMFG that is a gorgeous bike.

[bpjones]

Thanks for the photos guys....I think all I'm interested in is the two fairing side covers for each side - 4 total. Anybody got some laying around they didn't get to and/or don't want?

[janik416]

Did the gutter ones myself. Just cost me $20. $20 bucks for the black seatshirt and already had a ladder. Just had to wait to dark. I figure i got a good 6 months before my neighbor is wondering y his gutters are gettin clogged again. just kidding I bought them at Home Depo. for like $12.

[PaceMaster]

Nice job gang ... my fairings are off right now.... Home depot right down the street..
Great info

[ham4864]

made them my self $7 bucks,and love them

[Vega]

Here's mine...

I made them out of a black wire office trash can...

[Takeuon]

Slightly off topic, but OMFG that is a gorgeous bike.

Thank you Keven!

[mestona]

Here's mine...

I made them out of a black wire office trash can...

So what office did you swipe the can from Jerred?

[Vega]

So what office did you swipe the can from Jerred?

It was my girlfriend's.. Shhhh...

[Hobo]

I am about to put mine on & the glue that came with the grilles is Loctite quick set epoxy 2 part stuff, but what concerns me is that it says on the back of the packet it is only good for a max. temp of 120 degF/49 degC, I dont think that is going to cut it, what do you guys think ?

[Vega]

hmmmm, I used liquid gasket maker... Also, JB's weld compound is pretty good. That one comes in two tubes like epoxy.