Let me see your undertails!!!!

[cobravenom39]

Let me see what you guys have done. I'm more curious to see who has some homemade stuff that looks nice and neat.

[Powers739]

Just hack it off... I said Hack...

[cobravenom39]

^^^That's what I'm talking about. Well played. Could you tell me how you did it??

[V-Max 2 Busa]

Eliminated shovel with Exacto knife & file, blacked out rear reflector & fabricated new lic. plate mounting bracket from .080 sheet aluminum.

[Powers739]

^^^That's what I'm talking about.  Well played.  Could you tell me how you did it??

Do a search and you will find all the information you need. I used a dremel tool and just cut it off. Just cleaned up the rough edges a little, installed Clearly Alternative Integrated Tail light. Very easy, the only cost was the tail light.

[Powers739]

sorry, problem with the board...

[Blue1]

Has anyone cut off the fender and also the black plastic that protrudes under the tail section on the sides? That, and the reflector under the taillight has got to go IMHO.

I am going to make room in the garage, put the bike on stands, take off the tail section and see if I can replicate the fender/wheel well between the edges of the painted tail section. If that works out, I'll have it powder coated black.

The tricky part will be license plate placement and figuring out the cleanest way to illuminate the plate.

Blue1

[Blue1]

Has anyone cut off the fender and also the black plastic that protrudes under the tail section on the sides? That, and the reflector under the taillight has got to go IMHO.

I am going to make room in the garage, put the bike on stands, take off the tail section and see if I can replicate the fender/wheel well between the edges of the painted tail section. If that works out, I'll have it powder coated black.

The tricky part will be license plate placement and figuring out the cleanest way to illuminate the plate.

Blue1

[Blue1]

Has anyone cut off the fender and also the black plastic that protrudes under the tail section on the sides? That, and the reflector under the taillight has got to go IMHO.

I am going to make room in the garage, put the bike on stands, take off the tail section and see if I can replicate the fender/wheel well between the edges of the painted tail section. If that works out, I'll have it powder coated black.

The tricky part will be license plate placement and figuring out the cleanest way to illuminate the plate.

Blue1

[cobravenom39]

^^^That's what I'm talking about.  Well played.  Could you tell me how you did it??

Do a search and you will find all the information you need.  I used a dremel tool and just cut it off.  Just cleaned up the rough edges a little, installed Clearly Alternative Integrated Tail light.  Very easy, the only cost was the tail light.

thanks for the posts, guys. I was gonna do a search, but there was a problem with the search function (and the board, I think) last night. Keep em coming.
For those of you that used a dremel, what kind of cutting wheel did you use, b/c last time I tried doing it with the dremel it melted the plastic b/c it got so hot.

[Powers739]

I used a variable speed dremel, so I just slowed the speed down and didn't have a problem. I don't remember if I used a mini cutoff wheel or if it was like s "zip" bit. Either one will work...

[Suijuris]

I almost cut the shovel off this last weekend, BUT I am not impressed with any of the lighting mods. I want my turn signals to be seen. thought about attaching them just under the body-- chickened out, cause I can't picture if it would look too dorky.

[LadyHawk]

[mistah187]

go mototeck lights are built in. heck with the dremel use a razor knife. it super easy and you get a way better line.

[mistah187]

sorry heres a pic

[frisbee]

Hell I cut my first one off with a sawzall. But this time I went with a new one .

[BigDiesel]

The tricky part will be license plate placement and figuring out the cleanest way to illuminate the plate.

Blue1

whut tha he11 whud I wana show'em THAT for?! LoL

(please let there not be any WI po-po on here today...)

[bigginbusa]

Rumble Concepts

[motochris]

hotbodies! bought in 06 for the 05

[GsxrBots]

Just buy a gen 2 and unbolt it!


Posted using my HTC EVO with tapatalk.