Need to know everyones

Monsta , tell him not to bother .

  - idle's like crap
  - slower quarter mile
  - chance to flip it
  - less mpg
  - blah blah blah

 why bother ?  If he's going for the land speed record, he wouldn't be asking about a TRE on this board .

   I tried it.....went back to semi-stock .

        hav a trouble free 1......RSD.
Have an '03, ran with it for a bit, but took it off. At least on mine it idle's, like he said, crap! As soon as it came off, it was much better at idle.

Do what you like, put it on, run a bit and then take it off and see if there is a difference.

Either way, ride safe
 
Here are some hard evidence.

The green line is before mapping

The red line is with the ATRE connected.

The blue line is with the ATRE disconnected.

As you can see before 2500 rpm the ATRE seems to work just fine.
But from 7000 rpm you drop a litle power and you loose 2 hp at the top.
WTF makes 134# torque and 167HP not any busa I know of
sum-thing doesn't add up .

the torque calclulation seems like its off by about 30-35 .


buy a new dyno.........RSD.
 
I have done alot of test and you do not lose HP .... the loss of HP is heat. just post the A/F and you will see. you do gain HP in 1st and 2nd
YES Gain 1HP that is all and the gain it at 9K-10K
 
Here are some hard evidence.

The green line is before mapping

The red line is with the ATRE connected.

The blue line is with the ATRE disconnected.

As you can see before 2500 rpm the ATRE seems to work just fine.
But from 7000 rpm you drop a litle power and you loose 2 hp at the top.
WTF........what the heck is this thing.......134tq.......me doubts it highly!!!!
 
Here are some hard evidence.

The green line is before mapping

The red line is with the ATRE connected.

The blue line is with the ATRE disconnected.

As you can see before 2500 rpm the ATRE seems to work just fine.
But from 7000 rpm you drop a litle power and you loose 2 hp at the top.
WTF........what the heck is this thing.......134tq.......me doubts it highly!!!!
you could have just quoted my statement and saved the typing
 
Here are some hard evidence.

The green line is before mapping

The red line is with the ATRE connected.

The blue line is with the ATRE disconnected.

As you can see before 2500 rpm the ATRE seems to work just fine.
But from 7000 rpm you drop a litle power and you loose 2 hp at the top.
WTF........what the heck is this thing.......134tq.......me doubts it highly!!!!
you could have just quoted my statement and saved the typing
Guess I shoulda read the whole thing before posting......seen it after I posted.......just didn't care I guess.....to lazy to edit it.
 
Back
Top