Went out riding last night and did a few quick sprints into the mid triple digits
03 stage 1
stock motor/stock compression
0.5 bar spring
h20 injection set at 5lbs
motorhead built and tuned the bike back in 05 and it has run flawlessly ever since.
Probably about 10k on the turbo setup.
Sorry for the poor audio quality...had the waterproof door on at the time.
I did find the FMU bracket was busted when I lift the tank and that was sitting ontop of the motor. I check the shim and its not cracked.
almost sounded like the turbine wheel was rubbing on the housing....
My guess is turbo bearing, busted ring, or rod.....
I haven't tore into anything yet...waiting to get some ideas.
03 stage 1
stock motor/stock compression
0.5 bar spring
h20 injection set at 5lbs
motorhead built and tuned the bike back in 05 and it has run flawlessly ever since.
Probably about 10k on the turbo setup.
Sorry for the poor audio quality...had the waterproof door on at the time.
I did find the FMU bracket was busted when I lift the tank and that was sitting ontop of the motor. I check the shim and its not cracked.
almost sounded like the turbine wheel was rubbing on the housing....
My guess is turbo bearing, busted ring, or rod.....
I haven't tore into anything yet...waiting to get some ideas.