Custom Twin Turbo Busa... Yay or Nay
- Thread starter RussellJ
- Start date
I guess my answer is, it depends. If you're a company trying to promote the services, products, and the shop's abilities I say job well done. It's a nice shop/show bike. It's a good marketing tool / rolling billboard. Obviously if this were performance focused or street ability focused then the project went in the wrong direction.
it can be yours for $250,000.00... no seriously tell them I sent ya. 
Hayabusa Custom McCoy Motorsports Suzuki GSXR 1300 Hayabusa Custom Twin Turbo Phoenix Motorcycle - Tobefast
Hayabusa Custom McCoy Motorsports Suzuki GSXR 1300 Hayabusa Custom Twin Turbo Phoenix Motorcycle - Tobefast
it can be yours for $250,000.00... no seriously tell them I sent ya.
Hayabusa Custom McCoy Motorsports Suzuki GSXR 1300 Hayabusa Custom Twin Turbo Phoenix Motorcycle - Tobefast
Maybe if they included hayabusa more i might think it was a Hayabusa.....
FEATURES STATS:
3D Billet
"SUPERMAN" Front Reservoir Covers
Hayabusa Action Powdercoat: Farmingdale, NY
Hayabusa Wheels - Translucent Red Powder coated center strips
Hayabusa 3 Front Brake Calipers - Translucent Red Powder coated
Hayabusa Rear Brake Caliper - Translucent Red Powder coated
Hayabusa Swing arm - Translucent Red Powder coated
Hayabusa Sprocket - Polished
Hayabusa Ducati Flower Drive Cover - Translucent Red Powder coated
Hayabusa Custom Sub frame pan - Translucent Red Powder coated
Hayabusa Custom Sub frame Under tray - Translucent Red Powder coated
Hayabusa Rearsets - Polished & Translucent Red Powder coated
Hayabusa Nitrous Bottles (2) - Translucent Red Powder coated
Hayabusa Nitrous Bottle brackets (2) - Polished
Hayabusa Frame Translucent Red Powder coated
Hayabusa Clutch Cover - Polished & Translucent Red Powder coated
Hayabusa Clutch Cover bolts - Translucent Red Powder coated
Hayabusa Starter Motor Cover - Translucent Red Powder coated
Hayabusa Engine Block - Polished & Translucent Red Powder coated
Hayabusa Turbos - Polished & Translucent Red Powder coated
Hayabusa Forks - Polished
Hayabusa Triple Trees - Polished
Hayabusa Clip-ons - Polished
Hayabusa Levers (Brake and clutch) - Polished
Hayabusa Twin outlet Turbo Airbox - Translucent Red Powder coated
Hayabusa ANT Video Screen Monitors - Translucent Red Powder coated
Hayabusa AIM Dashboard - Translucent Red Powder coated
Hayabusa Side Panel Covers -Translucent Red Powder coated
Hayabusa Gas Cap - Translucent Red Powder coated
Hayabusa Pingel Shifter Brackets (2) - Polished & Translucent Red Powder coated
Hayabusa Clutch Adjustment Cover - Translucent Red Powder coated
Hayabusa Shift Rod - Translucent Red Powder coated
Hayabusa Oil Pan - Polished & Translucent Red Powder coated
Hayabusa Wave Rotor Carriers (2) - Polished & Translucent Red Powder coated
Hayabusa Wave Rotor buttons Translucent Red Powder coated
AIM
MXL PISTA Data logging digital dash board (Translucent Red Powder Coated)
APEX
Hayabusa Tuning / Wiring / Dyno /
Hayabusa ANT Racing
Hayabusa Dual (2) Rear View Cameras
Hayabusa Dual Cyclops Monitor Displays (Translucent Red Powder coated)
AVON
Hayabusa Venom-R Rear Tire 250/40R18
Hayabusa AV59 Front Tire 120/70 ZR17
Catalyst Composites
Hayabusa Custom Fabricated Tail Section (hand built utilizing R1 upper slope / MilleR rear upper / CBR 1000rr Seat vents)
Hayabusa Custom Carbon Fiber Gas Tank
Hayabusa Front Section (Custom Fabricated R1 Head light cut outs and Aprilia ram air vent)
Hayabusa Billet Machined Gas cap
Cox
Hayabusa Radiator Grill
Cyko Racing
Hayabusa Custom ONE OFF 3D Billet Wheels (Chrome & Translucent Red Powder Coated)
Hayabusa Cyko Rear bolt cover dish cone
BAZAAZ
Hayabusa BPD II ECU Stand alone Engine Management System
Browns
Hayabusa Custom Chrome Swingarm
Dixon Customs
Hayabusa Custom Upholstery and shaved seat covered in Ostrich skin
Galfer
Hayabusa Galfer Front Stainless Steel Braided Brake Lines (Red)
Hayabusa Galfer Rear Stainless Steel Braided Brake Line (Red)
Hayabusa Galfer Clutch Stainless Steel Braided Clutch Line (Red)
Hayabusa Race Galfer Modified Lines with inline mounted Line Coolers on all Braided Lines
Hayabusa Galfer World Super bike Front Brake Rotors (Show Polished with Translucent Red carrier inners and carrier button mounts)
Hayabusa Race Wave Rotor Brake Disk
Gator Customs
Hayabusa Complete Painting, Bodywork Customizing and Gator Glass
Hayabusa Painted Handle Bar Control covers
Hayabusa Gator Glass Tail Section (transparent red and clear panels)
Hayabusa Gator Glass Rear Tail light system
Hayabusa Gator Glass Rear Turn Signals
Hayabusa Gator Glass Tank Striping and Custom upper tank flanges
Hayabusa One OFF custom side panels.
Hayabusa Hand inlayed and flanged turbo side air vents
Gator Glass Front Turn Signal System
Gator Glass Clear Side Panel openings (exposes engine)
Mesh Aluminum Covers Tail section vents (2)
Mesh Aluminum Covers Side Panel turbo vents (2)
Mesh Aluminum Cover Front Ram Air Vent
Gator Glass front "Twin Turbo Nitrous"
Combined Windscreen into front Upper bodywork
Combined Headlight/covers into front Upper bodywork
Gator Glass Front Upper bodywork (5 distinct "ghost" lighted areas)
Combined R1 and Hayabusa Front Fender (SLIM low profile)
Hayabusa Painted Rear Headlight and assembly covers
Hayabusa Custom inlayed polished side panel covers (around exhaust pipes)
Greggs Customs
Hayabusa Single Sided Swing Arm - Hand built Hayabusa single sided arm with trellis style hand fabricated rails (Chromed and Translucent Red Powder coated).
Hayabusa Compressed air tank system built swing arm.
Hayabusa Custom Frame - Hand built frame. Factory frame spars were separated and hand built trellis frame spars were built and incorporated into the frame with machined junction points (Chrome and Translucent Powder Coated).
Hayabusa Balled Milled Rear Frame Spars
Hayabusa Custom Ducati Rear Hub drive assembly
Hayabusa Custom Mounted Brembo rear brake setup
K & N
Hayabusa Air Filters (Twin w/ Chromed cap covers)
Koenig
Hayabusa Low Profile Oil Pan (Polished & Translucent Red Powder Coated)
McCoy Motorsports
Hayabusa Custom ONE OFF Adjustable Sub frame (Chrome)
Hayabusa Custom "THUMB HAMMER" Throttle side nitrous purge/activation switch
Hayabusa Clutch Oiling System with Stealth Mounted Oil Cooler
Hayabusa Air Kickstand -Custom switch activated Kickstand
Hayabusa Custom Designed Paint Scheme
Hayabusa Custom One off seat pan
Hayabusa Custom Radiator System
Hayabusa Custom Radiator Overflow Catch Tank (Chrome)
Hayabusa Custom Camera Frame Rail Mounts
Hayabusa Fairing Side cover panels (Translucent Red Powder Coated)
Hayabusa Stainless Braided Air line hoses
Motec
Hayabusa Air and Pressure Data sensors
MPS
Hayabusa Air cylinder - Integrated into air kickstand
Naarden
Hayabusa "DRAG LINK" Lowering Link System
Nitrous Express
Hayabusa Sport bike "WET" Nitrous System with Carbon Fiber Solenoids
Hayabusa Purge System with Carbon Fiber Solenoids
Hayabusa Dual (2) 1 lb. Nitrous bottles (Translucent Red Powder Coated)
Hayabusa Dual (2) Billet Bottle Brackets
Hayabusa Custom Fabricated Nitrous Bottle Fill up junction point
Hayabusa NO Magic Neon
Hayabusa Hyperstrip LED System
Hayabusa CL Pods
Hayabusa Extreme Step Light Bars
Hayabusa Micro Magic LED (Gator Glass)
Hayabusa Wireless Perimeter Remote
Hayabusa Performance Café
Hayabusa Complete Engine Build
Hayabusa Performance Coatings
Hayabusa Turbo Exhaust Pipe HIGH Temperature Coating
PINGEL
Hayabusa Electronic Shift System
Hayabusa Digital Ignition Kill (UP / DOWN) box
Hayabusa Shift arm mount system
Hayabusa Chrome Dual (UP / DOWN) handle bar shift switch
Sport Chrome
Hayabusa Magnesium Chrome Valve Cover
Hayabusa Chrome Frame (4 piece)
Hayabusa Chrome Sub frame
Hayabusa Chrome Starter Cover
Techmount
Hayabusa Video Screen Display Mounts (Chrome)
Trac Dynamics
Hayabusa Race Valve and Lowered Front Fork System (Show Polished)
Tricky Air
Hayabusa Rear Air suspension system
Hayabusa Solenoid Air Compressor pump Setup
Tsubaki
Hayabusa Nickel Plated 152 Link Roller Chain
Velocity Racing
Custom Hayabusa Twin Turbo System
Custom Hayabusa Twin Outlet Turbo Airbox (Translucent Red Powder Coated)
Hayabusa Clutch Cover and Clutch System (Polished and Translucent Red Powder Coated cover with custom red bolts)
Hayabusa Custom Modified Garret GT Turbos (Translucent Red Powder Coated & Polished) 250 HP each (2)
Custom Hayabusa Dynamic (Raked Front End) (Polished)
Custom Hayabusa Twin Outlet Exhaust Pipes (Jet hot coated)
Vortex Racing
Hayabusa Rearsets (Chromed and Translucent Red Powder Coated)
Hayabusa Shift Rod (Translucent Red Powder Coated)
Walbro
Hayabusa Fuel Pump 340
YMS
Hayabusa Billet Machined Handle bar Grips (Anodized Red)
Hayabusa Billet Machined Bar Ends (Anodized Red)
sportcustoms71
Registered
sweet looking bike imo, but looks nothing like a busa
O Holy P
Registered
Those are nice "Hayabusa" headlights there......................gay. And to twin turbo an inline 4 is pretty ridiculous, there is no point other than to say you did it. That is why it's the only existing one out there, no one else is retarded enough to add the extra weight for pretty much nothing other than to say it was done.
Fail.
Fail.
mine doesn't cost you $250,000 and makes more power
I've also got to take time to hate on the builders "mcoy" of this bike.....you actually took you time to build this and used a velocity kit instead of a RCC or NLR!!!!! 500HP I would have to see that with my own eyes. Now that I've got that out of my system....twin turbo is a cool idea but only if it was fabbed and designed by a builder in the know and not a sales shop that chromes and paints everything
Last edited:
I'm not hating but if he gave me that bike I would sell it and buy a stock busa and a nice boat
It is unfortunate that several people who contributed heavily to this build never got credit in any magazines for this incredible "show" bike. Although the bike does run, it has never been ridden anywhere - to my knowledge - except out of a trailer. It has never been put on a dyno and tuned, there are no dyno sheets attesting to its rear wheel horsepower. And I am sure that if you ever turned it up and actually tried to put 500 HP down, that beautiful swingarm would twist like a pretzel . . . still, a very nice bike. 
coreywiley
Registered
Yeah that bike is ugly but I do like the paint job on it
Sick R1, I want it!!
DCar
Registered
the mccoy crew does some nice ass work. this is just a show/shop bike for saying "we can build you anything you want." it does have an R-1 noise but imo i still lick it. im an R1/busa fan so i got both bikes in one lol. ive done buisness with the mccoy on a number of occasions and they are one of the nicest people, most helpful people i have ever come across. Kentucky boys know how to break necks 
, sry gotta rep my home state boys.
, sry gotta rep my home state boys.
Similar threads
