Hi all. I’ve recently done a gen 2 swap onto my gen 1 frame. When the gen 2 ran, I can’t remember how it sound. But now that I have it in my frame, it seems like I have noise coming from top end of the engine. I’ve change to a DME 1.5inch oil pan, and put on a side winder with block off plates. I removed the oil restrictor behind the filter. It makes me really nervous because I spun 2 rod bearings on the last engine and don’t want it to happen again. I cleaned the picked up tube on the pan. I can’t figure out if it’s normal or not. It runs fine but sounds like I can hear the valves.. thanks in advanced. The new engine has 14k and has been bone stock the whole time.