Video Of Cutting Rear Fender For Trash Can Mod ( Metal Version )

[c10]

If your decent with sheet metal / non lowered bird this may be just the ticket for you .

[c10]

Part two is two minutes long of finished product .

[fallenarch]

Good work, thanks

[Blkoutbusa]

Wow, makes me wanna do this mod more now! I am debating lowering the bike so I need to decide which direction I wanna go....

[mabupa]

Great work! I lowered my bike and put a hole on my “trash can trunk”. I converted to the gsxr tail and put the OEM tail away, but i will definitely be doing this when I go back to my OEM tail setup. Did I miss it or you didn’t mention how thick that plate was?

[c10]

18 g 12" x 18 " from home depot $5.98

[mabupa]

18 g 12" x 18 " from home depot $5.98

Thanks c10!

[riccoh]

why wouldn't work on a lowered bike? mine is lowered two inches front and back and i run the aluminum tiger tail with masive room in there and i dont rub on that. i opted to keep my orig piece intact for future use... not that use the bike much since it sits behind a pile of concrete bags, tiles, dollies and lawn equipment now days... but this would be the best set up i can see for the orig undertray...

[c10]

Because it comes down further into tire contact area than what you have .

[c10]

This one was donated to a police officer that uses a Hayabusa as his patrol bike . His DVR unit will be housed in the storage tray I made .

[Mathewrussell52]

This one was donated to a police officer that uses a Hayabusa as his patrol bike . His DVR unit will be housed in the storage tray I made . View attachment 1576983

So bad a**. The bike and you doing this.