Swingarm, but not extended…..

[M3Busa]

Okay, back to the holy grail I come. Let's talk swing arms.

I don't know if it's possible, from an engineering standpoint, but could I get another swing arm that would allow me to run a wider tire, but NOT extended? Other prerequisites: must be flat black.

Links to vendors would be appreciated, oh yea and PICS of on NON-extended swing arms with wider tires.

Thanks

William
8 days until im back the the States!!!!

 

[proud dad]

I've never seen one that wasn't stretch a little.

 

[Mike.P175]

I think a 240 may need either 2 or 4 inches and
a 300 may need 6 inches just what I have seen
never saw one without some stretch

 

[Aquaman]

It needs to be stretched to be able to get a fat tire under it.

 

[proud dad]

Okay, back to the holy grail I come.  Let's talk swing arms.  

I don't know if it's possible, from an engineering standpoint, but could I get another swing arm that would allow me to run a wider tire, but NOT extended?  Other prerequisites: must be flat black.  

Links to vendors would be appreciated, oh yea and PICS of on NON-extended swing arms with wider tires.

Thanks

William
8 days until im back the the States!!!!

What unit are you with

My son will be back in the states about the same time.

 

[M3Busa]

Okay, back to the holy grail I come.  Let's talk swing arms.  

I don't know if it's possible, from an engineering standpoint, but could I get another swing arm that would allow me to run a wider tire, but NOT extended?  Other prerequisites: must be flat black.  

Links to vendors would be appreciated, oh yea and PICS of on NON-extended swing arms with wider tires.

Thanks

William
8 days until im back the the States!!!!

What unit are you with

My son will be back in the states about the same time.

infantry in Baghdad.

 

[Revolution]

yup, i think to run a wider rim/tire you need to go with a 2 inch stretch

 

[SLEEPERBUSA]

And you will either have to get offset sprockets, or an offset rim, so the chain will pass by the tire.

 

[M3Busa]

okay, yup, im staying stock.

Thanks, it was just a thought