Starting problem, intermittent,can anyone ,help identify this piece of harness,loom when I move it bike starts ok,ie fuel pump primed greatful for hel
- Thread starter greig
- Start date
Hayabusa Wannabe
Registered
- Joined
- May 24, 2017
- Messages
- 2,364
- Reaction score
- 4,141
Bumblebee
Registered
- Joined
- Jul 6, 2018
- Messages
- 33,018
- Reaction score
- 56,188
Welcome to the forum....
It looks like you have a Gen 2, what year is it?
Do you have a manual? It should show what that plug is for....my bike is sleeping for the winter so it's a challenge to go see for myself.
For future reference, keep the title of your thread shorter saving your question for the post.......makes it easier that way so you don't have to repeat yourself....
greig
Registered
- Joined
- Mar 9, 2026
- Messages
- 7
- Reaction score
- 12
Hi thanks for replying, bike was starting perfect put it away for winter 4 months ago ,last week put new battery in turned ignition on no pump primed, check up on dash display checked fuses ok ,moved that bit harness in picture pump primed bike started ,tried a few times more same outcome,the connection in pic has insulation tape on ,doesn't look correy
TrueGrit
Registered
- Joined
- Jul 6, 2019
- Messages
- 1,185
- Reaction score
- 1,955
Worldwide.
It's the internet man. But take that tape off, it can't be OEM.
(Comment for the mods it would be really really useful to see what country a poster is in. Have never been on such a USA heavy forum before)
Bumblebee
Registered
- Joined
- Jul 6, 2018
- Messages
- 33,018
- Reaction score
- 56,188
I take it you aren't the original owner....
I went out and took a look at my Gen 2 and can't see that harness anywhere so it must be normally located under the tail panel, it looks like someone was messing with it and most likely broke a wire hence why you are getting an intermittent cycle...
Like mentioned, take the tape off but I would also be removing the rear tail plastics to check the entire rear harness.....
If not, it could leave you on the side of the road somewhere.
Bumblebee
Registered
- Joined
- Jul 6, 2018
- Messages
- 33,018
- Reaction score
- 56,188
This forum was originated in the US by the owner Captain........who still maintains and watches over his baby....most of the people on this site are located in the US.
If you hover over a user name icon, you can see where they are from...., if the user has filled in their information,
Excellent, thank you.
- Joined
- Jan 13, 2002
- Messages
- 12,592
- Reaction score
- 1,376
Bumblebee
Registered
- Joined
- Jul 6, 2018
- Messages
- 33,018
- Reaction score
- 56,188
greig
Registered
- Joined
- Mar 9, 2026
- Messages
- 7
- Reaction score
- 12
Hi update on starting problem,busa was in garage today, mechanic found someone had removed factory alarm badly found two faults soldered and heatshruk wires said it could of been worse,also fitted a pair of bridgestone s22 tyres 55 profile rear ,k tech 10 nm springs seals ,oil ,45 tooth afam sprocket to compensate for bigger diameter tyres pick it up tomorrow ,can't wait been of 4 months ,winter ,salt on roads
Bumblebee
Registered
- Joined
- Jul 6, 2018
- Messages
- 33,018
- Reaction score
- 56,188
Great to hear it is sorted out......