rear brake line

[1300 05 busa]

does anyone know where i can get the rear brake line. i need one that will work with 4 in ext arm. thanks

 

[05BusaLe]

Yes, loosen the banjo bolt on the stock line at the master cylinder and point it towards the rear! Tighten bolt and bleed air out of line! Hope that helps.

 

[Big Tuna]

(05BusaLe @ Apr. 25 2007,01:04) Yes, loosen the banjo bolt on the stock line at the master cylinder and point it towards the rear! Tighten bolt and bleed air out of line! Hope that helps.

+1 ....just use the stock....I'm a +8 with the stock line

 

[1300 05 busa]

man thanks

 

[NightCrawler]

(05BusaLe @ Apr. 24 2007,23:04) Yes, loosen the banjo bolt on the stock line at the master cylinder and point it towards the rear! Tighten bolt and bleed air out of line! Hope that helps.



05BusaLE:
I've never bled the brakes on anything. Could you point me towards a tutorial on how to bleed the Busa brakes or maybe give me some advice?

Hey 1300 .. thanks for asking. I was going to ask this in about a month or so when I lower and add the extensions to my bike.

 

[fastnotch2002]

or if your going s/s lines speigler makes them to custom length and ends, had to get a custom one for my R1 after changing rearsets.