dolilind
Registered
Mostley for those who have seen the bike.
What do you think a fair going asking price?
Here the short list.
05 busa
about 10k miles
Galfer wave front rotors
Ebc HH front pads
Goodrich front braided high flow lines
Screw in valve stems front and rear
HID 25k headlamps hi and low (cant by them)
Double Bubble windscreen
Steering Damper Mod (90-140w gear oil)
Vortex upper tree
New fork seals
Ken Wheeler tuned suspension
Goodrich braided clutch line
Vortex spin off gas cap
NOS purge
NOS 50 dry shot
Air Ram tubes sealed
Air Box gutted
K&N filter
NOS jet after filter
70mm short Velocity stacks
Pair valve removed
Air Box sealed to frame rails
Throttle Bodies Synced
Vance and Hines Pro head
Bigger valves
Heavy valve springs
Adjustable cam gears
2 intake cams
TRE
PC3 USb powercommander (custom dyno mapped)
APE shift forks
APE billett shift rods
APE clutch support
Barnett clutch springs
Vortex Race rear sets
Brock Short meg full system
removed belly pan
Schnitz +1" rear lift links
Custom rear brake cylinder
rear undertail brake cylinder removed
Goodrich braided rear line
Galfer wave rear rotor
Galfer HH rear pad.
Vortex 16t front sprocket
Renthal 43T rear sprocket
Clear tail lens
Texas Tail undertail
Power Pilot 2ct's
Schnitz urethane cush drive bushings.
Polished frame
Polished swingarm
Polished rear brake arm
polished grab bar
hump mod
Schnitz 2#bottle bracket
NOS 2# bottle with siphon tube removed
What do you think a fair going asking price?
Here the short list.
05 busa
about 10k miles
Galfer wave front rotors
Ebc HH front pads
Goodrich front braided high flow lines
Screw in valve stems front and rear
HID 25k headlamps hi and low (cant by them)
Double Bubble windscreen
Steering Damper Mod (90-140w gear oil)
Vortex upper tree
New fork seals
Ken Wheeler tuned suspension
Goodrich braided clutch line
Vortex spin off gas cap
NOS purge
NOS 50 dry shot
Air Ram tubes sealed
Air Box gutted
K&N filter
NOS jet after filter
70mm short Velocity stacks
Pair valve removed
Air Box sealed to frame rails
Throttle Bodies Synced
Vance and Hines Pro head
Bigger valves
Heavy valve springs
Adjustable cam gears
2 intake cams
TRE
PC3 USb powercommander (custom dyno mapped)
APE shift forks
APE billett shift rods
APE clutch support
Barnett clutch springs
Vortex Race rear sets
Brock Short meg full system
removed belly pan
Schnitz +1" rear lift links
Custom rear brake cylinder
rear undertail brake cylinder removed
Goodrich braided rear line
Galfer wave rear rotor
Galfer HH rear pad.
Vortex 16t front sprocket
Renthal 43T rear sprocket
Clear tail lens
Texas Tail undertail
Power Pilot 2ct's
Schnitz urethane cush drive bushings.
Polished frame
Polished swingarm
Polished rear brake arm
polished grab bar
hump mod
Schnitz 2#bottle bracket
NOS 2# bottle with siphon tube removed