Air shifter mount

[McyMike]

To make a long story short, I had my MPS air shifter mounted to push the linkage rather than pulling it up and I was missing a lot of shifts.  I have remounted it so it is about 90 degrees or verticle to the shifter....now the damn thing hits my foot and is in the way.  Any other solutions for mounting?



<!--EDIT|McyMike
Reason for Edit: None given...|1151675502 -->

 

[chevelle]

i use a spencer cycle mount on mine,no problems,i have a adjustable regulater(carolina cycle) i use this regulater on both bikes (busa,12,both with dry shots) that regulater has high and low pressure gauge ports,spencer has the regulaters and cheap little gauges to set line pressure with

 

[psycobusa]

here's how i mounted mine......no problems at all

 

[sully]

Spencer cycle sells a bracket to put it under the foot peg so you will not have any problems.   I like min and while you are at it you can reverse your shift pattern to on up 5 down for when you are foot shifting, i hardly ever miss a shift now.

CLICKY



<!--EDIT|sully
Reason for Edit: None given...|1152213839 -->