Air horns on Gen 3.... Show me what you all done gone and done to make horns louder.

[Ked0607]

So needless to say no one can here this poor sounding horn. Looking at a few different options but have seen nothing on the GEN 3. I am not opposed to all electric horns either. Just have not torn the front of the bike off yet or ordered anything. I will be tearing it all apart in the next two weeks.

[InfiniteReality]

I ran a Horn Blasters air horn on my Gen2. It fit in the stock location if you bend the stock bracket. I ran it for a while, but on big bumps it would contact the top of the fender (I was lowered). I eventually swapped back in a regular horn.

This was 12yrs ago, I'd like to hope that someone now makes a similar horn in an even more compact form.

[InfiniteReality]

Forgot to mention that I ran air horns on the Gen1 as well, but it was one of the parts store horns with 2-3 horns and separate tiny compressor. I had the compressor mounted where the OEM horn was, the trumpets were under the dash (between dash side panels and body). This was louder, but more cumbersome to install.

https://www.amazon.com/Carfka-Electric-Compressor-Vehicles-Motorcycle/dp/B087FBQTY1/

If you use anything with a compressor, don't forget to wire in a relay.