36 tooth sprocket

[202mphbusa]

I have 38,39,40,41,42,43,44,45,46

need 36 and 37

 

[sixpack577]

just ordered a 36 for mine. With the 19 front, that should be good for 230.8 ish per gearing commander. Gonna be in the 50's next week.....hmmmmm

You reckon you have enough hp to get there??
lol

 

[michael parris heuberger]

Ordered a 38 too cause why not.

Hi. As posted before you can get a 20 tooth. I have Marvic wheeles and a 34 rear with a 20 front and overdrive 5th and 6th gears and a rev limit of 13500 RPM.

 

[greg3852]

You reckon you have enough hp to get there??
lol

I do not have any idea what this little monster is going to be capable of. I’m hoping for over 220 but we’ll definitely find out. Lol

 

[202mphbusa]

I do not have any idea what this little monster is going to be capable of. I’m hoping for over 220 but we’ll definitely find out. Lol

are you sure the thing doesn't have a Billet output shaft?
someone went into the motor...........I did shaft before rods

 

[greg3852]

Yes it does have a billet output shaft. I have the front 18 and 19 for the billet output shaft

 

[michael parris heuberger]

I do not have any idea what this little monster is going to be capable of. I’m hoping for over 220 but we’ll definitely find out. Lol

Hi. If you want call and may be we could go up to Loring

 

[202mphbusa]

Yes it does have a billet output shaft. I have the front 18 and 19 for the billet output shaft

So a 20 is just a phone call away
OEM shaft 20 is harder to find