2nd gen conversion radiator dilemma

[Ice3460]

Hey guys, I'm in the middle of fairing converting my 2000 to a 2nd gen. I also purchased a 2nd gen radiator and oil cooler to make it easier to mount the newer fairings.

My 1st gen has what I'm assuming is a thermostat sensor on the radiator itself, but i don't see one on the newer radiator. I should also mention that I also converted my cluster to 2nd gen gauges. My question is. What is my best option as far as this sensor goes? Does the 2nd gen not have a sensor? If it does where is it supposed to be installed?
Thanks in advance

 

[ottafish]

Heya, there's been a few threads on here about what nneds doing.
Search for threads by @jeffgordons24 and @1busa as they both have write ups and steps on what they did. From memory, there's some modding needed of the radiator.

 

[GIXERHP]

https://store.schnitzracing.com/rcc-radiator-fan-switch-relocator-suzuki-gsx1300r-hayabusa-99-07/?gclid=CjwKCAjw4MP5BRBtEiwASfwAL2wwaAVCSrHGo4cA_Rdu-VVjW1o29tLy9b0j0_uZwkB4ylzwtci5FhoCvBMQAvD_BwE

 

[GIXERHP]

or here is a way cheaper version

Fan Temp Switch Relocator, Suzuki Hayabusa 1999-2007

The relocator for the fan temperature switch. It relocates the fan temperature switch to the lower right radiator hose, by moving the temperature sensor the fan will come on sooner.

monsterturbos.com

 

[Berlin Germany]

see my homepage here - the entire description for the gen1
and yes it is written in english.