Swing arm License Plate Bracket/ Light

[Big Red]

I was looking at a black powder-coated swing arm bracket offered by NYCPARTS to mount on the left side of the bike. I didn't find a light that could be used with it.I would like a small LED but don't know what size to use or how it should be wired or mounted. Any suggestions?

 

[dadofthree]

Make sure it's lawful in your state. If it is, just run the wiring from your current tag light to two of the tag bolt LEDs commonly available.

 

[thebbbusa]

You'll have to fab something up that shines down from the tail, or something...cause you'll never get light to bend around that tag.

 

[BigBSBusa]

Light bolts work the best. You'll have to run the wires from the tail down to them, but they work great. Lite n' Boltz

 

[kleckbusa]

Try this but you have to cut the back of the bike off.

 

[frisbee]

Try this but you have to cut the back of the bike off.

I really like the way that looks from behind !

 

[Big Red]

I like the Lite n' Boltz; thanks BigBSBusa!