Recent content by Rdmetz

Ok so I have fixed the knock...it was the bearings I do believe....it went away after replacing them...but also replaced cush drives for good measure, now she's as quiet as she ever was.... Thanks again for everyones input!! :beerchug:

My chain is pretty tight very little play in it I was strutted and now I'm riding on the stock shock which has made the noise come and go depending on how the weight is transfered it seems to do it less when the weight is transfered up front and the lighter the ride on the bike the less it seems...

Anyone got an idea of who actually manufacturers this helmet? I love my Hayabusa RF-1000 but its Grey/Black and I have an 06 Limited. I want something that matches my bike, and this would be great but dont want some crappy built helmet suzuki had dressed up for them. Anyone have an idea?

Well another update. I have been struted since I got the bike and with my size and weight I dont think its was such a good idea so I've put the stock shock back on and raised the bike back to original height the noise now seems to come and go. Mainly it comes when the bike is under load like...

Ok Update I put the bike on the stand and spun the tire by hand no knock....inspected chain and the sprocket both seem to be in good shape. The knock only seems to happen when the tire has traction on the ground and only at low speeds With the tire up and in all gears including netural no...

lol Lettie

all sound like legitimate possibilites I'll be sure to check it when I get home the bike runs fine and changes gears no problems...well ocassionlay land in neutral going to second but feel thats most likely my big foot not getting under the shifter good enough. But the chain seems to most likely...

Ok so over the past week or so my 06 Busa LE has developed what I can only describe as a rolling knock...the bike was wrecked about 2 months ago when I hit a deer 2000.00 dollars later I've had her back together and on the road for about a month or so...and really no problems...then this. It...

Do you think he even has the bike anymore that was like 5 years ago!! I'm sure all these years later he's still waiting on some advice as to whether he should stunt a busa ;-)

hmm...dont know man im still not clear on your second power source thing from what part of the hid kit did you run the second power cord and where did you tap into for it? The same spot you tapped into for the halo? or something else I can see how you could tap into that cord but I just dont...

ok so the blue wire is used to connect the projector to a high beam connector and the clear cord that rainbow couldnt figure out is a power connector for the flap to make the light into a high beam if you have the blue connector hooked up the white is all that is needed according to the techs at...

Not yet guess I'll try that but seeing how the you and a few others on this board have done this install especially with you taking photos during the install that I could get some help here things are a lil easier to follow when I can see it rather than just be told If you've done this...

rainbow I appreciate your help like I've stated I've gotten everything working ccfl is tapped into the spare connector coming off the harness near the right turn signal I also have the hid connected to the the ballast and the ballast to the fused relay going to the battery as far as the white...

ok so I got the headlight all hooked up I have the halo working and the projector seems good I did adjust the light so that the cut off was about 40 feet away but took the bike out and the light just doesn't seem bright enough I can barely see anything and have to turn on my high beam just to...

I posted this in pashnit's sponsored area but not alot going on there so I figured I'd take it to the place it really fits...busa mods...my favorite so far if I can just get it working! Ok so I'm a bit stuck with all this stuff plug n play doesn't exactly describe what I'm dealing but at...