Recent content by nurse_bobcat

Ya, thanks for the help and the input. I checked everything ya'l said before i headed out. ^_^ It was a slightly nerveracking ride to the shop.

So, i got to SA,tx and we removed the fairings. The oil sensor/hose was cracked and leaking alittle oil. :( so we ordered a new one, we also ordered heat wrap for the full exhaust that was somewhat close to it. Thanks for the help yal. Somehow i cannot tell oil burning from rubber. +1 for...

:banghead: i knew i hit a badger at 5am! :P no badger remains yet...

i'll check the wiring once i get outside ^_^, i don't think i have ran anything over, and no oil drips i dont think

no worries, any idea? what happens ifyour tire pressure is super low? or could it be the highbeam burning?

Austin TX

So i noticed last night when i stopped, there was some light smoke/haze and a burning rubber smell coming from the front of the bike...I saw it because of the front headlight was on and it seemed like it was coming from the headlight. Should i be concerned, could it be low tire...

nurse_bobcat has entered a new Hayabusa in the garage. Go check out their 2004 Hayabusa Gsx1300r!

So i had my midpipe shortened about 6 inches. I have a short stutter around 4k rpm, but the rest is fine. do i need to remap the whole bike or just the mid range area?

By any chance, do you still have that map for an 04 busa, i have a gen 1 brocks full street system, airbox mod and kn filter.

Thanks for the intake everyone ^_^

Awesome, thanks for the insight on the ram air duct. I probably won't go to a larger size 1441/1507.. I have hindle headers(full system). So, the system is quieter, which is ok. I wouldn't mind if it was a tad bit louder, would it be bad to keep the hinder headers and put a 2 bros shorty on it?

Just shooting out an idea! would it be worth replacing the turn signals with anotmher ram air duct that attaches into the stock on.. The idea behind it would be allowing more air to enter in the box. question 2... Why is the exhaust on the full system 14 inches. it's really really long, and...

So, today i finally went to a shop to borrow some TOOLS.. MIG welder and a saw. I have a used hindle full 4-2-1 exhaust on my gen 1, airbox mod filter and pc3. The full exhaust sticks the pipe way far out. like near the taillight. So i cut the midpipe about 6 inches or so short and welded it up...

Thanks yal.... chop away indeed. ^_^ sounds like my day is planned out well