Recent content by Hayadoing

I did last friction plate one tooth from the others. Cleaning an bleeding the slave cylinder today. If that doesn't change things I will pull the stack back out and measure the thickness after drying then. Thank you guys for your advice I really appreciate it. Can't wait to go riding again .

Put clutch slave support bracket on, still slipping, pulled apart clutch an put back together same thing . I'm going to bleed clutch slave. I did notice that when I put the plunger back into the hub it would not go all the way in. Ihad to release the hydraulic pressure on the slave cylinder...

I have not had the time lately, " stupid work thing". I will be able to get at it this weekend. I will let you know. Thanks

I bought it. Thank you

I'm looking at the clutch slave and there is movement ( ie. Flex) when I pull in the clutch.

Yes I did.

Yes I did.

When I put the fiction plates and steels in exactly like the instructions showed. The spring spacers are said to be omitted if I use the heavy duty springs. I suppose I will take it apart and triple check the double check. Thank you for your help.

I have a 2002 busa 12,000 miles on it. I did the brock's clutch mod and put in new plate's ,steels , and springs . Test ride the bike acted as if the clutch wasn't disengaging all the way. I used motorcycle oil in the engine, and followed the instructions to the T. Any ideas would help , I...