Recent content by HalfHourEarly

Lark I got the instructions from a site that seems to be down right now but here's a link to another site that seems good. http://www.wardsweb.org/busa/hayabusa_mods_pairvalve.html I cut off the hose to the airbox hose to about 1 inch, then removed it, filled one end with gasket-maker and...

Thanks guys. Romoved the PAIR this wekend and the backfiring stopped. It's strange that it happened even on a stock exhaust but it's gone now. Thanks again HalfHourEarly

Revlis I am hoping that it is something related to the air intake. I will try to get that apart and check everything. I looked at the air filter but that looks clean. Is there any downside to removing the PAIR completely? Thanks for the help. Halfhourearly

CA, Sorry to hear about your drop. I just received my touch-up Silver/Copper from Color-Rite.com but they don't have the Orange listed yet. They have just about everything so I would suggest giving them a call. They may have it. I'll let you know how mine turns out. (Winter Garage Tip-Over)...

Stealth_Busa Thanks for the quick reply. My bike still has the stock exhaust and everything else is stock as well. Any advice on checking to see if it is the PAIR Valve diaphram? Regarding the CC Tensioner, the service record shows that it was replaced twice. The one that is on the bike now...

Guys, I'm new to the group and am trying to absorb some technical knowledge from you guys since I am just a beginner mayself. Also, There is very little local help available here in Newfoundland, Canada and I beleive I'm the only 99 rider in the Province. Anyway, I have several issues that may...

A few days ago I goofed on both accounts. I overtightened and followed the stock markings only to end up with a misaligned rear sprocket. Last night I gave my chain a good 3/4" to 1" slack and straightened the alignment. There must be an easier way but here's what I ended up doing: Lied on my...

Would like to get the same help.  Just bought a '99 Busa last week and would like a recommendation on chain and sprockets.  Also, is there a quick check for sprocket wear or should I just replace them with the chain?