Recent content by Efreo

I had considered it, but being in Perth Western Australia limits me a bit. I've had some made in 7075 T6 ally, and they had a cut out in to rduce the size a bit. Probably ended up costing me AUS$100 to make a pair! I suppose if there is enough interest, I could consider a few pairs. The photos...

If you get tired of changing dogbones to go back to standard height, try these. Std, 50mm and 100mm and you don't grind any parts of the frame lugs, and only undo the lower bolt.

The side stand mod is about getting a dremmel and grinding a bit off the sidestand so it leans over a bit more. Grind the flat on the part that mounts to the frame and grind very little at a time. 1 mm or so is plenty. Important if you lower the bike for drag racing. The TRE is a timing retarder...

The file I've attached is a CAD file. I haven't tried posting a picture on this yet, but I have one on Phoobucket of the prototype. I'll wait till the new ones are cut and polished up, and then I'll post a picture of them. Thanks

For what it's worth, I'm trying to attach a CAD file of my dogbones. I think they are an improvement on what is generally available, as no mods required and std, -50mm and -100mm easy to change by undoing just the lower bolt. No mods to frame and the lower fairing stays in place. Possible to...

As far as the font files go, I'm waiting for feedback from the laser guy. BUT, I have designed a better mousetrap, well, dogbones. In Oz, it's not worth making them commercially, but I'm sure in the states it is. I don't want to make money as such, but I don't want my design stolen and...

Silly really, but I've just been taken to task for pronouncing kanji wrong. For what it's worth it's pronounced Cun gee, not can gee!

Incredible detail!

You're a genius!! Just what the doc ordered and yes I even know what a vector is! If you are in Oz too, even better. To contact me, use efreo1@gmail.com and if you can attach the files, great. Many thanks to all who've answered! The dogbones get trialled tomorrow. They give 50mm and 100m...

On the subject of dogbones, I bought a set of those you posted above, and was most annoyed at not being able to use all three settings without doing some mods to the bike around the lower frame lugs. You can't use the standard height setting on those, so if you don't want to do grinding, you...

Tghe start of a new day here in Perth and great to see the responses overnight. Forgive me if I don't reply quickly as the time differences prevent that. Many thanks, and yes, everyone is describing what I'm after. I've got some dogbones being laser cut and wanted to add the kanji or word...

Thank you for the welcome, and g'day mate to you. What I want to do is laser engrave the word Hayabusa onto a piece of stuff I'm getting made, so I need to know the font or have a file with the word on it that the laser guy can use. Doing a set of dogbones.

Does anyone know what the correct font is for the word Hayabusa, or does anyone have the word in a CAD file?