Recent content by BUSA GHOSTRIDER

My family’s prayers and condolences to Wes's family. Keep on ridin, wherever you may be buddy.

2009 "Phantom"

I can't remember if it was the high or low beam but one of the bulbs had 3 or 4 plastic tab that needed to be trimmed to fit into the housing. It was extremely simple and didn't created any other fitment issues. check the pinned install by Blanca...

Sorry to hear about your problem with ddm. I've had nothing but good luck with mine! I think that if you took a poll of how many people like their ddm hid's on this site the response would be overwhelmingly positive. Did you try to send them back? I'd order another set as inexpensive as...

I just installed my two hids last weekend and wired in this timer. It was extremely simple. there is a video on the site to help you with hid install and a schematic to help with the timer. great price, easy to adjust and install. well worth the money. Tripage LED

It's been a pretty rough road the last couple of weeks with the bike. I'll cut to the chase and let you guys know the just of it. I have the SRP stage 1 kit. I put the H.O. oil pump gear in the bike (this may come into factor). The bike was tuned by Frank up in New York, so I know thats good...

Good info, thanks for that! It'll make oil changes a whole lot easier on the pocket! :beerchug:

Thanks for the good info!

Looks great!! Did you just stick them on and go or are you gonna get them clear coated? How tough was the wiring?

Nope, at sea level, so that can't be it. I do have an auto meter mechanical that I can throw on there if nothin else works. I'm gonna go over the lines tomorrow and see what I can come up with. Thanks for your help Murdered. I'm gonna check into that rotella-t the next time I'm at the...

I installed this little union in the boost line as per the GlowShift instructions. It looks like it's to keep water or condensation out of the signal box. Could this be contributing? I may try to pull it out, install a straight connector, and see what I get.

Thanks for the heads up on the Rotella-T. I'm figuring it's safe for the bike if you're usin it. Is it rated to meet or exceed JASO. I think that's what my buddy told me to look out for. I guess some have friction addatives that are bad for the clutch. Just Checkin :rulez:

I do have one question that I'm just not sure about. I adjusted the fuel pressure to 43 psi. and the A/F doesn't look too crazy, but why does my boost read -5 psi? I gave the throttle a little bump and it moved to -2. Is it normal for it to read negative on a gauge that also shows...

Pics of the lights. I'll try a vid when I'm done.

Lots of pics to show!! High output oil pump gear installed! I finished the fuel system the other night which put me at about dunn!! :thumbsup: I ran the extra lights that I wanted to under the tank and am currently fabing a bracket for my rear view camera. My buddy and I filled her...