05 busa with 99 engine. Had issues with bogging out at low rpm so I changed spark plugs and took off fuel pump to clean it out. Put everything back together and the bike sounded amazing for a few seconds then cut off. Now the start button does nothing at all not even a clicking sound. Fuel pump also not priming.
I’ve tried: New battery, Bypass kickstand switch, bypass clutch switch, new fuse in every single slot, reseating relays, reseated connections on ecu, tried an entirely different killswitch.
With multimeter I’m getting no voltage at the fuel pump and no voltage at the starter. There is volts making it to fuse box. I can get the starter to spin by bridging the starter relay. It still doesn’t start because nothing is happening at the fuel pump (no volts there). Where do I go from here? I feel like I’ve exhausted all my knowledge so any help is appreciated
I’ve tried: New battery, Bypass kickstand switch, bypass clutch switch, new fuse in every single slot, reseating relays, reseated connections on ecu, tried an entirely different killswitch.
With multimeter I’m getting no voltage at the fuel pump and no voltage at the starter. There is volts making it to fuse box. I can get the starter to spin by bridging the starter relay. It still doesn’t start because nothing is happening at the fuel pump (no volts there). Where do I go from here? I feel like I’ve exhausted all my knowledge so any help is appreciated