ok. Here's the problem: Bought a new set of Avon storms and had them installed at the dealer 200 rear, stock front. Same set-up as with the Bridgestones I was running.
went to ATL that weekend and noticed on slow down a minor wobble at below 5 mph. It has continually got worse. Replaced steering damper, dealer said it was bad, checked the balance, dealer said it was good, checked the rotors dealer said was straight and in spec checked tire and he said was in fine working order. Checked steering head bearings, tight and working properly.
Took her to a speed shop, put new sprokets, chain and bearings in her. He said the rim was wallowed out where the bearings are pressed into. I looked and didn't see any problem but I have no facilities to put and indicator on it nor do I know the tolerances. He doesn't like chromre rims and said this was the problem before he even looked at it and said he confirmed it during bearing installation. Replaced them last year, the one on the inside on the sprocket side went bad.not demolished just rough turning.
I am at my wits end with this problem and don't want to buy stuff I don't need but want to get my baby up to snuff again.
she is an 01 I bought brand new.put a chrome swingarm on 2 years ago chrome rims 4 years ago. Hindle and pc3 last year. those are the functional changes.
I didn't notice anything wrong with this bike before I put the new tires on.
If anyone can help me out of this nightmare I would be eternally greatful.
went to ATL that weekend and noticed on slow down a minor wobble at below 5 mph. It has continually got worse. Replaced steering damper, dealer said it was bad, checked the balance, dealer said it was good, checked the rotors dealer said was straight and in spec checked tire and he said was in fine working order. Checked steering head bearings, tight and working properly.
Took her to a speed shop, put new sprokets, chain and bearings in her. He said the rim was wallowed out where the bearings are pressed into. I looked and didn't see any problem but I have no facilities to put and indicator on it nor do I know the tolerances. He doesn't like chromre rims and said this was the problem before he even looked at it and said he confirmed it during bearing installation. Replaced them last year, the one on the inside on the sprocket side went bad.not demolished just rough turning.
I am at my wits end with this problem and don't want to buy stuff I don't need but want to get my baby up to snuff again.
she is an 01 I bought brand new.put a chrome swingarm on 2 years ago chrome rims 4 years ago. Hindle and pc3 last year. those are the functional changes.
I didn't notice anything wrong with this bike before I put the new tires on.
If anyone can help me out of this nightmare I would be eternally greatful.