shogun
Registered
Hey guys, changing the coolant soon. Once Ive flushed the old coolant from disconnecting the lower pump hose should I use distilled water and fill JUST the radiator to the inlet (below the cap) or do i have to fill the overflow tank as well? Once i've filled the rad/and or the overflow tank with distilled water I am supposed to turn it on, let it run to operating temperature then flush again correct, and oh yea, the manual says to bleed any remaining air into the system turn the bike on let it run and re-fill the overflow tank as needed but is this done with the cap on the rad or off?
thanks
thanks
Last edited: