So I have gen2 fans on my gen1 and now all of a sudden the fuse constantly keeps blowing. I had a 30 amp fuse in there too which is higher than you are supposed to?. All I have done is a ground wire coming from a switch to turn on the fans. I have already ohm checked everything to look for shorts and the only thing left to do it bypass the stock harness and do my own wiring for the fans... I hate electrical problems. The fans work fine but after a ride the fuse blows even when I don't turn the fans on.... So it has to be a problem in the stock wiring. I rewired the fans from the plug to the fans and still does it...