cipher5791
Registered
I am a proud new owner of a 2002 Busa. I swapped the black rims for crome and threw unique paint scheme on the fairings. I extended the rear and lowered the rear. I used chrome emblems after the painting as well as a chrome upper tree and chrome grips. This bike was a rebuild and most of my parts came off of ebay(hence the location of the frame sliders). I went with that since the hole was already there. Performance wise my bike is stock other than the Micron slip-ons. They were shortened due to some damage and plus I was rebuilding on a budget.
I was about to perchase some of the screens to go in the holes of my fairings when a good friend of mine took me to Lowes and showed me a piece of screen for a window. It cost about 25 bucks and we used some wire cutters and some silicone. The screens actually look chrome so that was an added plus. I advise any new busa owners to try your local hardware store before you go drop 60 to 100 bucks on a set. I really think that is all these people that sell them use anyways.
I was about to perchase some of the screens to go in the holes of my fairings when a good friend of mine took me to Lowes and showed me a piece of screen for a window. It cost about 25 bucks and we used some wire cutters and some silicone. The screens actually look chrome so that was an added plus. I advise any new busa owners to try your local hardware store before you go drop 60 to 100 bucks on a set. I really think that is all these people that sell them use anyways.