scorpionreptyle
Registered
Hello guys! Few days ago i encountered a problem with my `99 busa. I decided to remove the TRE installed by myself half a year ago. Everything was perfectly fine in removing and assembling of the TRE and original OEM GPS harness,but after I start the bike, 2nd LCD where total mileage,trips meters and consumption meters are, it shows just "dashes" blinking all the time. when I press the select buton it cycle between options,but shows only lines,more or less,depending on what I select ( total mileage = more lines "-----------" ,first and second trip meters show less lines "-----" and fuel consumption option just three lines "---" ,all blinking. After I put her on rear stand and cycle through gears speed clock is not working. All others are working fine,at startup ,check test is showing everything normal. I don't know what is happening,i triple check the harness of gps where I work at and nothing;i even put back the TRE,and still nothing. Checked the speedo sensor harness and looked ok. Before I remove the TRE and put back original OEM GPS I started the bike and everything worked....I`m very confused. Please help me solve it ,I`ll appreciate!!!!! Sorry for bad English!