6lbs just not enough

[Cncbusa]

Baby busa rider

 

[Cncbusa]

Arm finally showed up from dme. 76-80. Rolling chassis should be done soon. Front end is finished, need to make a couple spacers and mount the penske shock.

 

[Cncbusa]

Notice the carbon reaset dropouts gonna have carbon arms on them too. Figure they arent really used anyway and a wreck is a wreck poop breaks

 

[michael parris heuberger]

Notice the carbon reaset dropouts gonna have carbon arms on them too. Figure they arent really used anyway and a wreck is a wreck poop breaks

Hi. You did not short neck the bike? That is my next step then powder coat or paint the frame. I like the 3 step powder coat.

 

[Cncbusa]

N

Hi. You did not short neck the bike? That is my next step then powder coat or paint the frame. I like the 3 step powder coat.

No. Its low enough for me. Im 6'6" almost 300 lbs. Its hard enough riding bikes this low as it is. Im going to powder coat everything later. But trying to spend money on go fast parts only for now.

 

[ColdBusa]

N

No. Its low enough for me. Im 6'6" almost 300 lbs. Its hard enough riding bikes this low as it is. Im going to powder coat everything later. But trying to spend money on go fast parts only for now.

How much front suspension travel have you got? I ask because it looks like the front tire is quite big and will hit the bottom tree when the suspension compresses.

 

[Cncbusa]

Zero travel. If i end up not liking it ill do another set with an inch or so. It is a 120 dunlop but a 17" r1 wheel. I could obviously go to the 16 but i have the wheels. Lets just hope for no 3' wheelies that i immediately let out of

 

[Cncbusa]

(The forks have solid rods inside)

 

[michael parris heuberger]

(The forks have solid rods inside)

Hi. I run a 120/60/17. there does not any good 16 inch tires out there I would rub a 16 if I had found a good tire.

 

[michael parris heuberger]

Hi. I run a 120/60/17. there does not any good 16 inch tires out there I would rub a 16 if I had found a good tire.

Hi who made your arm?

 

[ColdBusa]

(The forks have solid rods inside)

Right on. I kinda figured. Looks good!

 

[Cncbusa]

With at little help from your kids

 

[Cncbusa]

Shes rollin

 

[Cncbusa]

C.f grudge sets

 

[Cncbusa]

Finished

 

[Cncbusa]

Getn there

 

[Cncbusa]

Motors back together. Stuck with the stock block. Money issues.... will go to the billet sleeved next yr.

 

[Cncbusa]

Started on water pump replacement to fuel pump mount. But think im going to redesign it to be all one piece like the dme.

 

[Cncbusa]

Hi who made your arm?

Dme

 

[michael parris heuberger]

Started on water pump replacement to fuel pump mount. But think im going to redesign it to be all one piece like the dme.

View attachment 1639123

Hi. What fuel pump will you be running?