no pressure in clutch lever

[KhandyRhedBhusa]

I'm pretty sure it is related to having a leak at the bottom
The part where u bleed it from,
The underside of that unit is leaking pretty good.

I'm on mobile right now but I will post here and research on pc.

But I am guess my problem is there is a gasket needs replacing.
And from that will not build pressure because of leak
Posted via Mobile Device

[mike1180]

IMO the clutch slave cylinder has a piston and seal setup that is leaking.

[dadofthree]

That seal goes. Make sure you keep the fluid off of everything. It will ruin the paint.

[Mr Bogus]

yea, you are probably very right... leak = no fluid = no pressure...

pretty easy fix at least.. need to tear it apart and make sure corrosion is not an issue and put some fresh seals in the thing...

[KhandyRhedBhusa]

Nice...... thanks! Glad its an easy fix.
Weird how it seemed to b fine enough in the morning,
While driving, but the night before it actually will
Snow here in south Texas, that it broke. Being the bikes my only ride.
24 degree, sleet in morning then snow
And y wad going to ride.
I took it as a sign not to ride so I took
The company truck home.
Posted via Mobile Device