New mod items

[Busa Bill]

Right now there set at the highest height without touching the fairing on a full turn left or right , I would say no on the adjustable for these, remember 3"1/4" is allot of height ,the front fairing isnt made for it anyway ,any higher than this height would not look good .this is the maxwithout chopping up the front fairing.

[Busa Bill]

Another

[Busa Bill]

Front View

[ranman]

[Busa Bill]

Side View: so you can see what they look like from the side of the Bike

[JINKSTER]

Busa Bill et al...I'm flattered and blushing however....ever since recently losing about 50lbs?...i'd be a poor choice to review such a product as I'm finding comfort low down these days and wouldn't wanna hafta hack up my beloved puig touring windscreen....shame though as I did install longer SS brake and clutch lines to accomodate the 1 1/4 genmar I just removed a few months ago...nevertheless...judging by the pix?...Busa Bills new riser design seems ingeneously simple yet effective...so in all fairness to Busa Bill and the H.org?....I think Busa Bill (and all) would be best off selecting a review candidate who will better apprciate and benefit inthe long term from raised ergo's.

But again....thank you for the graciouse offer and respectful recommendations.

Best wishes on your cool new product and...L8R, Bill.

[Busa Bill]

Thanks everyone for wanting to help out and I wish I could send them out to a few people but the cost of them will not allow me to, Sorry . Im only going to have 1 set to give out and I have sent Jinkster a pm to see if he is intrested of trying a 2"set out as soon as i get the set done . I picked Jinkster for one he gives awesome reviews and 2nd I have done his mods to my own bike and everyone has been succesful . 3rd there are alot of people that trust what he says and thats the person i would like to be afilliated with weather he gives me a good or bad review.

[CorrodedAlien]

They look good, but I was looking for more of the Genmar like this

rather than just raising the grips.

[Busa Bill]

Oh sorry .

[Busa Bill]

Well just got back from riding at Deal's Gap and the Charahala Skyway in NC.,What awesome roads up there ,We had a great time and the 3'1/4 Risers work out perfect ,could not have had asked for anymore comfort . know problems at all .

we put on between 200-250miles a day of riding, other than my Arss getting sore i could have kept going . AtticDog will be doing a review on the 2" risers here with in a couple weeks ,i'll be sending him a set hopefully Monday .to Try out .

..I have a extra set of 3"1/4 if some one is intrested $175TYD for Org. Members ,I will be asking $225+shipping on ebay for these after I have few sets made .
There are a few things you will have to do to install these 3"1/4 risers .
1.) Front Brake lines will have to be replaced with longer lines , the Stock clutch works out fine with a little tweeking , but I went ahead and orderd mine in a set with the Brake lines. I bought Galfer Lines ,I have the # for you and the length also .
2.)Throttle Lines and High Idel cables are stock you have to reroute them.
3.) The Windscreen will need a little trimming on the sides , easy to do ,and you cant even tell after your done if you didnt know it wasnt made that way .
4.) And that about it .

The 2" risers should allow you to use all stock equipment ,havent tryed them yet thats why im having AtticDog to give them a try and see hom much time it will take someone to install them and have him give me feed back what may be needed or changed . So I will be waiting as you to see the out come of those also.
Busa Bill