Fuel pump relay issues

[busapatt]

I have a gen 1 I did install a aem320 in tank my problem is when I dump the throotle it cuts in and out quick under heavy load. I was told I need a bigger relay when I install the fuel pump I did have to go up a size on the fuse to a 30amp but I notice the fuel pump wire seem to get hot. Now can I just buy any fuel relay kit how would I wore this with the existing harness

[202mphbusa]

I have a gen 1 I did install a aem320 in tank my problem is when I dump the throotle it cuts in and out quick under heavy load. I was told I need a bigger relay when I install the fuel pump I did have to go up a size on the fuse to a 30amp but I notice the fuel pump wire seem to get hot. Now can I just buy any fuel relay kit how would I wore this with the existing harness

30 amp sounds large to me
Relay shouldn't cut out on throttle chop
Load on pump should be decreasing not increasing
UNLESS you are getting a HUGE pressure spike on throttle close

[busapatt]

So u think the relay is good

[202mphbusa]

What is the relay rated at ? the OEM one?
I Use the OEM relay circuit to trigger a proper HD dedicated relay and power circuit for the Fuel pump

[busapatt]

Everything is oem the fuel pump is a 320aem I just used a bigger fuse cuase it kept blowing the fuse when it prime

What is the relay rated at ? the OEM one?
I Use the OEM relay circuit to trigger a proper HD dedicated relay and power circuit for the Fuel pump

[202mphbusa]

Everything is oem the fuel pump is a 320aem I just used a bigger fuse cuase it kept blowing the fuse when it prime

Something sounds off. Shouldn’t pop on prime

[busapatt]

All I did was put that pump in and it keep popping the fuse i went up to 30 fuse it been good but when u dump throotle u feel a cut but it gets right back to it I was told I have to do a bigger relay