Any Headstock Stand Owners Out There?

[RedlineStands]

I need to know if anyone here uses a Pit Bull or any other headstock stands on their busa? I'm finding from my own experience that making a universal headstock stand that will lift the busa without any fairing removal is near impossible. So, have any manufacturers managed to make one that works with the upper fairing and fender in place?

Ian
REDLINE ENGINEERING - Sportbike Swingarm Stands Sport Bike Stands Motorcycle Lifts Swing Arm Stand Jack Suzuki Honda Yamaha Kawasaki

[BigBSBusa]

I use the PitBull that lifts under the triple tree.

[goodluck]

the pitbull will work unless you have your bike lowered alot

[Aquaman]

Yup, if you lower your bike, forget it.

[suzuki4life]

I have 2 front lift stands(one pitt bull and one generic)...neither have problems lifting a stock busa.

[rubber2burn]

I have a PitBull Stem stand but I have to remove the black piece of plastic from under the nose in order to use the stand. If that black piece is not removed then the stand hits that plastic piece and I am pretty sure it would put enough pressure on the piece to break it if it was not removed.

[omslaw]

I have a 'Thruster' stand. It clears the black plastic, but does slightly put some pressure on the nose. I've still had it up there with no problems...

[suzuki4life]

I have a PitBull Stem stand but I have to remove the black piece of plastic from under the nose in order to use the stand. If that black piece is not removed then the stand hits that plastic piece and I am pretty sure it would put enough pressure on the piece to break it if it was not removed.

yep it touches that piece...its unpainted and never had one break.

[Zoinks!]

I have a vortex front stand that lifts from the tripple tree. It works with no fairing or fender removal. I did take out the black piece under the nose, but it might be able to lift without taking that out. I don't know. I didn't try.