Recent content by Trickplay461

I made this video on how to install the module. Pretty str8 forward. I appreciate all the peeps that stepped up and helped me get'er done. Most guys responded quick and were helpful as hell. Thanks again and I hope this helps someone. :laugh:

I finished this small project. Thank you to all who helped me get there.:bowdown: Since I didnt find a direct "how to" on here, I took the time to make a clip. I posted on youtube and made a post here for future reference. Thanks again!:thumbsup:

K fellas I finished this small project. Thanks to all of you who added something to get her done. Since I did not find an exact write up on this in here, I made a you-tube video and a new post on an exact "How To". Thanks again all :cheerleader:

Tech support just told me im tied into the wrong line. I will follow up. They are saying im wired into the running lights. Didnt know we had running lights...will follow up ...:duh:

Damn...i hooked it up and it didnt work. They turned on but the brake light went right into "blink mode". When it hit the brakes it went solid...when I let go it started to blink...thoughts? Im thinking a grounding problem, but then it wouldnt even light up if not properly grounded right...

Here is a pic of where I'm at...you can see the plug in the foreground ...I gently cut that wrap open easily exposing the brown wire.

I got this all torn down ...the links and assist worked great...but I just thought....where exactly do I splice this in? BEFORE the large plug? or after the plug on the tail end of the wiring? I assume before the large plug, the brown wire gives it constant power? Something told me that if i...

Man fellas! Gotta say THANKS first and foremost for the timely replies. Much appreciated :thumbsup: The service manual would be greatly appreciated if you can make it happen. I saw the pic there of the removed tail in the "how to" write up. All I saw was a plug (white). Do I how to slice this...

Ok cool....lastly....is the ground run directly to the negative terminal? or do I look to ground it somewhere on the frame? I'm always unsure about this issue. Thanks again.

Cool. I'm not the brightest when looking at these diagrams. I assume the lettering denotes color...what about the wiring that shows B/W? Does that mean it can be either/or, or rather its a single wire containing a black & white set? Did not know the tail was removable. :) Thanks for help!

Cool. I'm not the brightest when looking at these diagrams. I assume the lettering denotes color...what about the wiring that shows B/W? Does that mean it can be either/or, or rather its a single wire containing a black & white set? Did not know the tail was removable. :) Thanks for help!

Sorry, Its a 2009 Haya Gen 2. Remove the tail?

Got one of the "back off brake light modules". Removed the seat and looking at batteries. Anyone have a clue where to tap into the wires for the module? :banghead:

Thx guys for the replies. The gasket did come off with some WD40 and a plumbers wrench w/ a rag. The pipes are still off by about a 1/4 inch. I removed the metal washer / sleeve that houses the bolt on the rear peg. This allowed the pipe to fit and it seems its on there solid. My only question...

Hey Peeps... Quick question. I went to install the M4 Retro pipes on my 09 Busa. Slipped off the old ones and when I slipped on the new one the exhaust did not go all the way into position. It was off by about an inch of the rear peg bracket. I looked down and saw that there was some type of...