Any other suggestions? I am taking it out either tomorrow or saturday to do some testing. Going to put the old fuel pressure reg on there. (no more FMU) I am going to install the new injector plugs I got just to eliminate my possibly bad "fix" previously. Any other suggestions though? Run...
I did use the check valve yes, and yes it turns over and will start but only if you give it half throttle and keep it high in the rpm.. It will not idle or act normal until you let it sit.
This thing was at the tuners for 3 weeks >< He told me when I left it was a physical something not giving fuel to the engine. His suggestion was the fuel tank was getting vacuumed and starving the rail after a hard pull. I told him simply to pull the fuel cap off and see. He made excuses for...
Thanks man! Yeah Its a shame it cant be used I need to figure this shizz out. Im thinking back a bit one of the injector plugs was bad and I "fixed" it but it was never perfect. I wonder if as it revs up and starts workin if it burns out the contact for a bit... I think I will replace that...
First off thanks for your response!
1. The tuning system is a PCV I have the autotune modual but its dissabled and only used for AFR readings currently.
2. Nothing should be abnormal I plugged it in the same way I would in a the bike. There are some modifications to the engine harness from...
Hey I have a 2006 hayabusa engine in a sandrail. I recently got the sandrail back from a tuner in Las Vegas NV. Neither they nor I have come across the solution to our problem.
We can "putt" around all day and part throttle stuff but as soon as we do a nice hard pull and let off the...
EFITechnology
Efi technology. It's basically the x2 with an extra 9pin serial connector for programming. Now the biggest predicament... haha they said their software is $1500 which they will sell to me at half price! Awesome!!! Not.... So $750 on a computer program do you think any other...
One sticker says
"QC Inspected. Y_MN. Date 10-6-09"
Seconds sticker says
"PNn 50-029 SN202"
A quick google search did nothing for me on either sticker. Anyone seen this box before?
My sand car doesn't want to run real well right off idle and so I plan to tune this ecu to fine tune the power. Only problem is I'm not sure what program or equipment I need as far as connections and software. Any help would be much appreciated.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.