Recent content by silverfreak

pull the oil fill cap and stick your nose to the fill hole.:poke:???

Wish i could have been more help.one of these days i will get the ecu editing equipment and start messing around with different maps.when i do ill let you know and we can do away with the power commanders.ps this is busadave on all other forums.:welcome::thumbsup:

wooohooo.i guess you could say you are a hot piece of Brass instead of @ss.:beerchug::laugh:

If it is going through all gear positions and you hear it clicking into gears,and also the bike will not go into 1st gear even without clutch and bike running.sounds like you have sheared the output shaft.if that is the case you are looking at 1500 +bucks parts and labor.if you were close to me...

saw the red snappers,but didnt catch a blowfish or puffer.but Dang sure a He!! of a bunch-o -Tunas :rofl::thumbsup::thumbsup::bowdown:

the carying agent used in the particular racing gas is called MTBE(methyl tertiary butyl ether)very potent stuff.nhra has banned this substance from its racing programs.most of the fuels that use it are generally below 12% of this additive per 55 gallon drum.this is what i have been told by a...

oops.not my wife.just a good close friend.:please:forgive me carl :cursin:

What.you wanna race.bring it on sweetheart.ill bring out old grey it might be a little slower than you being i out weigh you by bout 130 lbs.:poke:.seriously people she is definately fast.and gorgeous to. love you marie. busadave:beerchug:

2003 grey/silver 2008 blue/black/gold

She can definately make things transform.:banghead:

timing can only be checked by removing the cam cover.there should be 15 pins between the exhaust gear#2 and intake gear marking #3.if it jumped time more than likely the camchain tensioner is worn out or previous owner didnt do the recall.the bike would run very badly if it only jumped on...

The 03 is my anger management course and the 08 is the psychotherapist that i must visit on a daily basis to get my fix.and yes i am nuckin futz.:laugh:

Im with you.I have a 1397 with some head work and webb cams 13/4 comp making 207 on 91 octane pump gas.mrxo1 made 216 and 121 ft lbs tq.have 17000 miles on this setup.

if you want to get to the shift linkage ,mechanism.you will have to pull the engine.there is one or two bolts that cannot be removed with it in the bike.or at least that is the experiance that i had.mabey there is a special tool that will help. Good luck

If you want the steel sprockets.look at the sunstar sprockets.they are pretty much factory sprockets.