Recent content by shooter7712

CORDOVA Here's a good opportunity to run a TSDRA event or come and be part of the fun. spectator tickets are FREE.......quoted from TSDRA President Subject: TSDR Important Update for 9.50 AND 10.50 BIKE CLASSES Date: Wed, 5 May 2010 22:56:23 -0500 Dear 9.50 and 10.50 bike riders...

also the two stage idea is almost impossible with the internal gate. you can easily upgrade with a good welder and add an external gate. that would allow you to run a 6 lb spring with minimal creep and run a two stage setup like you mentioned.

just put a spacer plate in it to lower the compression ratio for 7 lbs. they creep if you stay in them hard for any period of time. the hahn is a great kit to start off with. if you burnt a piston you will have to take it down anyways. stick a .060 spacer in it and you will not loose a ton of...

get it fixed? where do you have four check valves? fmu and iap sensor...what else. how many vac ports is the iap tapped into. i also bought a spark retard check valve. bigger and pass more air.

yes it is a must for long turbo life if you drag race it. the blow off valve will release the air being compressed into your plenum which when the throttle is slammed shut at the end of the strip. if it is not released it will back up into the turbo and can damage the compressor blades and the...

shortten up the kill time. you will probably never be able to tell it was shorttened up, but it will reduce the ammount of unburned fuel in the exhaust. if it gets to short it just won't shift. then add a little more time until it does. i saw a guy at our track split his yosh. good show for a...

HHHHMMMMM. no takers. come on, i know someone must have tried this by know.

ok does anyone have the wiring diagram for a the gear indicator. i am trying to setup a duel stage waste gate (turbo xs). i am not sure how the sensor works, but i would like to set it up to run 8lbs on the first stage and then trigger it for 12lbs in third gear. it is set for 12lbs now. also...