Recent content by pacman

Hmmm, I think I might rush a little with the joy and happy smileyes... So, I changed both the regulator and the battery (new one, yuassa). When the motor is in idle it stays arround 13.5 V but when I start to accelerate it begins decreassing, but again, when I take my hand of the acceleration it...

Sure, I will as soon as I ....discover how to

Ok, problem seems to be solved: replaced the rectifier and in idle I have 13.8 with ligts on... I took the bike out tonight and had about 5-6 stops along the 'trip' and it started every time with ease Thanks for the support guys and I'll keep you updated regarding this story...

Guys, today I'll get another rectifier and I'll replace mine to see if that is the problem. I tried to measure the generator coil as described in the manual but I coud not find those 3 wires....

Another...strange question: 'generator coil' s the same as 'stator'? If not, is one of the 'little boxes' under the front seat (on left side of the frame)? Could that be the problem?

It's a very small picture in the manual..:( but i'l try to figure it out...

Hello guys, nice to find such a helpfull people here... I'm from Romania and I have this bike for 3 month now and no problem until this issue. I have the service manual, is this the same as user manual?

There is no aftermarket cover on either of the sides of the bike (the stator should be on the left side - the black cover, right?). Related to the rectifier, it has no melted connections and also I'll check it in one hour with a multimetera s described in the user manual. I also changed the...

No drop at all, at least for two and a half months since I got this bike. It is a 2000 model with 44K Km. As mods It has only full 4-2-1-1 akrapo line.

Hi guys, Here is my problem: I can not start the bike, it drains all my battery when I press the start button. I measured the battery and when the bike is running (I started it using wires from another battery) it stays at 12.5-12.8, but when I increase the revs it will start to loose voltage...