Recent content by OB_gsxr1300

BadBoy, 1216gsxr Badboy, Motorhead has forgotten more about engines and R&D than you probably know. Get your facts staight, he DOES have an extended arm and he does use a shifter. Instead of air, he uses a mechanical solinoid...same result footless shifts. 1216gsxr, Historically you are...

Com'on Dennis when are you really going turn it up?? That little Honda Turbo you have runs 18lbs of boost!! I'll bring my welder and we can weld that waste-gate shut..."you don't need no stinkin wastegate"..... See ya in a couple of weeks when I get my poor ole' GPZ turbo upto ya. 340hp...

mbuehler, If you want a cheap alternative, look at a "anti-serge valve" from a '90-'94 Eagle Talon (Mitsubishi Eclipse) Turbo's... BUT, there are some very good aftermarket ones available. Call NLR, he'll take care of ya.

I have the cure for the light problem (or should I say I have Motorheads cure for the problem). I have a complete Motorhead setup, his shifting computer box, cable shifter, and solinoid and all wiring. I switched to an air shifter, Prostar requirement. If any body is interested, $390. ($550...

Just got back from Motorheads shop, and seen his MC Express Turbo.. If you are in the market for a turbo, you should REALLY take a serious look at this unit. Although it is pricey, in this case you do get what you pay for! Some observations, the Turbo is a heavily modified Mitsubishi G13...

Just got back from Motorheads shop, and seen his MC Express Turbo.. If you are in the market for a turbo, you should REALLY take a serious look at this unit. Although it is pricey, in this case you do get what you pay for! Some observations, the Turbo is a heavily modified Mitsubishi G13...

I have a 6month old German Shepherd puppy. What are your opinions on getting him Neutered? As a point. the local K-9 unit does not do it...

Kirk, Lets do a little math... Lets see, if you can right 10 tickets a day at an average $100 ea. Times 5 days in a work week, thats $5000 per week. and let say for 50 weeks (2-weeks vaction of course!). We have a a nice cool quarter million dollars ($250,000), Lets see with benifits you...

I've seen that bike at FBG. The mods look pretty good, I like the rear swing arm mods. Get a set of Kiehin FCR41, down drafts, Sudco Inc. would be your best bet, they should be able to set the carbs very close to your needs.....

Gixxer1300R, Man have you been missing a good thing, adjusting fuel maps underload. When they come out with some REAL software for the Busa, that really remaps the factory EFI computer. Unlike the PCII that just alters the input signals. Using an eddie current dyno (ala Dynojet 250) with...

Muzzy, they have a stock Zx-12 go 192mph, and a piped only go 199.3mph as posted on Dragbike.com I guess all the cycle magazines didn't use the right gas.....more Kawaski propaganda, they have too many ZX-12R's sitting on the showroom floor......

Taking frontal area of Busa. 5.3ft^2 this formula will get you close... ((0.00436*MPH)^3)*(lbs) Lbs is weight of bike with rider

Here's a tip that might be worth looking into... The coils off the new Corvettes, maybe a nice replacement for the Busa. I'm looking into them for my TurboGPZ

BigaBusa, For your cranking problems get a Hawker "Oddesy" model battery. They are sealed, have about 50% more cranking amps, you can position them anyway you want. I have one on my 1327cc GS1150, and if you are familiar with these you know the starting problems. The Oddesy cured my...

I'm in upstate NY, anybody know of a Dynojet model 250 located near here???