Recent content by MrShelbyGT500

I’m in the Virginia Beach area

For sure!!

I am, coast line

The paint does have a ton of hours put into it. My son likes to flex on his IG. Both with Stitch and with Shelby. I’m sure tells all them ladies what they want to hear

It’s got both front rotors back on. The previous owner just rode with left side only, and I didn’t like it at all. The last pic with my son shows how it’s set up now.

She is fully painted, not wrapped. I truly appreciate everyone’s help! I’m going to order the MPS roller and see if that will help. I’ll adjust the chain to where I will normally ride, about 2 inches off the tire on air so I can still slam it when parked and raise it a bit if needed...

Full pics of Stitch. The last one was my son flexing for his IG on his 14th birthday a couple weeks ago.

The pics show the bike full down for now, and up about 3/4 of the way (way too high!), but to just show the chain slack.

To me it looks like it bolts onto the swing arm support bars, if your swing arm is made that way.

The only tensioner I’m really finding is the one from MPS. Anyone know of another company that may make one? https://www.mpsracing.com/images/products/Exoticycle/roller.jpg

At around 2 1/2-2 3/4 inches between tail and wheel, the chain is perfect. I’d I air up, it drops the chain onto the swing arm on top. I’m putting the new adjustable dog bones on to drop it to about an inch off the wheel for full drop, but I’m afraid of the chain dropping onto the swing arm when...

All the chain rollers I’ve found will tighten up the bottom of the chain. The big issue I’m having is that the top section of the chain is slacking down onto the swing arm too. Any way to correct that as well?

Thanks Boss! I’ll look around and see what I can find.

I have an 08 and I just installed the Platinum Air Ride Bleed Feed System. It works great! What do I do about the chain adjustment though? If I set it to My normal ride Height, it’s fine, but it becomes to slack it I raise it up or too tight if I drop it all the way down. Any recommendations for...