Recent content by HayaMon

Already have a new stator thank you.....its the rim under the stator that has the crack.

What's goin on guys.... So here it goes....I went down and have a small shark tooth sized piece broken from the circular rim under where the stator bolts to the engine case....Stator housing? I'm having a hard time getting someone that will weld it unless the engine is removed from the...

Thanks..guys. should have mentioned...I tried that first :/

Weird thing happened to the Busa today. Durring the initial gauge sweep...the speedo no longer sweeps to the end...goes about 20 miles short... and as a result is off that much in the mph. all my other gauges work fine....any help greatly appreciated.

Hi guys my 2000 started to make that high pitch awfull sound when trying to start it...and I know I need to upgrade the clutch...but,do I need to change everything and the starter:? please let me know asap...dont want to have it doing this for too long....also what case can get split ? is it was...

I searched first I R swear..........nothing came up......... :bowdown: maybe I spelleded octain wrong :whistle:

I was told to run my 00 busa on 87...though it does say 91 in the manual I believe......... I was told the lower compression busa's actually make more power on 87??? I have used both 93 and 87 w/o any problems.... only thing I notice is the price:lol: anyway....what are you guys running...

if you have aftermarket levers...try different settings. I found with my shorty's it will not start or will not always start on anything higher than #3. If you have stock levers....try starting it at differnt clutch positions. Possibly something might need adjustment.....??? just a...

Thanks for the welcome :) Yepp this is a 2k Busa,,,, I cant get the bike apart till tomorrow.......I will definitely check the connector again. thanks again guys

What up all........... Weird problem....... Took off the front to get to the blinkers to replace them with smoked.... got it back together and now.......the gas, temp gauges,idle are reading either too high or too low..... If i turn the bike on and off they go threw the usual spin up and after...