solenoid mount?

[dragonbusa]

Anybody have pics of were and what and how you mounted your solenoid? (dry shot set up)

 

[racer237]

I don't have a picture but I mounted my solenoids on the subframe

 

[Ludicrous Speed]

I just wire tied mine to a hose or something under the tank on my Gen1.... Some friends made nice little brackets to hold theirs, but it broke pretty quickly.

I had two lines coming off mine, so it did not want to move anyway.....

 

[Wild07]

Mine's ziptied to the tiger tail, right smack in the middle under the passenger seat. I can always do a quick engine off test to see if it's working or not, or if my bottle pressure is WAY too high I can bleed it off without gettin down to crack the line at the bottle.

 

[California Kid]

I mounted mine at the air box . shower head on the inside of air box and solenoid at the out side .

Bill

 

[California Kid]

Gixx1300r has a aw some spray bar for dry nitrous .


Bill

 

[fadiizzaldin]

here you go... they work perfectly

 

[fadiizzaldin]

another one...

 

[RedFalco]

here you go... they work perfectly

Liking that allot.. closer to the airbox = "stronger" hit. Gots me thinking...
I got mines tucked behind the right tail fairing / framing.

 

[Gixx1300R]

 

[fadiizzaldin]

Liking that allot.. closer to the airbox = "stronger" hit. Gots me thinking...
I got mines tucked behind the right tail fairing / framing.

Thanks.... i used a 30 HP shot jet and got 31! .... this is a very good read to understand nos in simple words.... worked greatly for me....

Amazon.com: The Nitrous Oxide High Performance Manual (9781904788898): Trevor Langfield: Books

 

[fadiizzaldin]

 

[B-12]

I made a small bracket to fit on the big bolt.
First pics are just to test the fit.
The purge solenoid fits with the fittings to the main ,and is suportet by a small tin-strip from below.
Relais fits to one of the bolts on top of solenoid.(pic 4)
Last pic is with complete wiring and feeded by 12 Oz bottles on each side.

gixx Looks fine
From down to airbox a like also. That looks clean. If id seen this before i would have done it this way.
Do you have bolts inside of box ?

 

[TurboR1391]

My setup

 

[ogre]

that bar looks like it may block a bit of airflow

 

[Gixx1300R]

Yes the bolts are inside the airbox

 

[TurboR1391]

that bar looks like it may block a bit of airflow

Trust me it's getting a lot of air The bike back halves well over 40mph

 

[YSI408]

That adams spray bar look nice

My setup

 

[TurboR1391]

That adams spray bar look nice

Thanks YSI408...........did you ever decide on your setup? I really like this Adams Setup. Probably going to get the same setup for my 1K.

 

[YSI408]

After seeing the adams spray bar and that you can keep your air filter in it. I will start looking for a adams bar if not I will go with the mps. I order the mini nos controller, next will be nitrous kit etc..

Thanks YSI408...........did you ever decide on your setup? I really like this Adams Setup. Probably going to get the same setup for my 1K.