Radar install

rbnjr

Registered
I want to use the Bell STI-R model radar detector and would like to know if anyone has tried to mount on of these on a busa. the receiver is 3X4X1 and im wondering if will fit the area below the headlight?

Thanks Much!
 
my adapter to plug in the radar is under my right dash. i used velco 2 mount it. I am not sure what a 'receiver' is. the detector itself fits nice just under the windscreen. my double bubble helps 2 c it
 
or do this which works and looks pretty slick

d 001.jpg
 
Mine's a passport, but you could probably do the same thing. Works really well and gives me the option to turn it on and off without having to unplug it.

0106081535.jpg


0106081536.jpg


8500 install 006.jpg


8500 install 010.jpg


8500 install 012.jpg


8500 install 013.jpg


1121072245a.jpg
 
The last picture was taken before I bolted it to the screen. The suction cups allowed it to bounce up and down when I went over bumps and sometimes it would bounce so hard the end with the display on it would smack the screen. Once I bolted it, that problem was solved.
 
Boy Howdy, I couldn't be without radar detection. My set up saved me four times this weekend alone.

Escort X50 detector with a heads up display H.A.R.D. is a sweet setup.
 
Back
Top