Gixx I'm wanting to use nos, what is the ideal set up to go with, I know there's no one best but I want to know what you would go with on a stock 08 Busa with a Yosh R-77 full exh. Everything as if you were putting a kit together, using your spray bar of course. Thanks. Also is there one particular brand your partial to over another?
i'm confused now for some small dry shot 40 i heard MPS fast fi box may cause some problems, the pcIII can adjust and be map to your setup with no problems, but you will need 2 maps 1 for normal riding one for nos. that is what i know. now i might be wrong i'm not a nos expert i just started messing around with nos dry sys and still confused.
i'm confused now for some small dry shot 40 i heard MPS fast fi box may cause some problems, the pcIII can adjust and be map to your setup with no problems, but you will need 2 maps 1 for normal riding one for nos. that is what i know. now i might be wrong i'm not a nos expert i just started messing around with nos dry sys and still confused.
AFTER, talking ALOT(thx nick)with GIXX 1300R, yes you are correct, i've checked into this box also, to run this box you would have to spray a minimum of 70hp JET(S), reason being is there is NO adjustment on the box to adjust AFR! So you have to tune the N2O to the box, which comes out in the neighborhood of 70hp. So yes, for SMALLER than this, a PC3 W/hub switch and 2nd map for the "juice" would be the way to go.
AFTER, talking ALOT(thx nick)with GIXX 1300R, yes you are correct, i've checked into this box also, to run this box you would have to spray a minimum of 70hp JET(S), reason being is there is NO adjustment on the box to adjust AFR! So you have to tune the N2O to the box, which comes out in the neighborhood of 70hp. So yes, for SMALLER than this, a PC3 W/hub switch and 2nd map for the "juice" would be the way to go.
You have it correct. for 40 shot the MPS box will richen the fuel mixture too much. Going too rich is just as bad as going to lean.
Obiwan has taught you well
wouldnt a 70 shot be to much for a stock motor.
I heard PC is coming out with a new PC to run the bikes with two sets of inj. Has a lot more features also, have you Gixx heard of this? Also would you suggest a one or two stage dry set up?